Jump to content

Would like to thank...

justn8

Recommended Posts

justn8

justn8

Posted
Posted

Well, can't remember actually if it was Tint Junkie or ///The Man, but I know it was either of them.

Bought a ton of lawn bag signs this year, put some up along the busiest street in town last week, and just got home now from putting up a ton tonight all over the place and out onto the main highways. I can't believe the amount of response these stupid things get, and it's virtually instant. I just wanted to thank them for saying they had a lot of success with them.

Trick I found for them, minimal info on them, and large large print. First day I got 4 calls from them, second day 3, next day 4, next day 2... etc. And that was only from about 20 of them, if that. Unreal.

Right now I'm finding out the best locations for them that work, and the locations where they stick around the longest before being seized/removed or taken. Then I'll just keep putting them up in those spots till I run out.

I vote these things for best bang for the buck of the cheap marketing strategies.

Also wanted to mention the weather here has been %&$# for most of the week. Rain, rain and more rain.

Link to comment
Share on other sites
Tint Wife

Tint Wife

Posted
Posted

It's amazing how sometimes the simplest things are the most effective ... hope it keeps working for you :lol

Well done. Pleased for you.

I can never tell if it's sarcasm or genuine with you Malcolm. Luckily I respect you while at the same time could care less about which it is :lol

:lol

Link to comment
Share on other sites
justn8

justn8

Posted
  • Author
Posted
It's amazing how sometimes the simplest things are the most effective ... hope it keeps working for you :lol
Well done. Pleased for you.

I can never tell if it's sarcasm or genuine with you Malcolm. Luckily I respect you while at the same time could care less about which it is :lol

:lol

Thanks! Just a piece of the puzzle. Over time it'd be nice to associate my business name with the service you know. These work well for that for now. Was steady before, picking up a lot more now. I finally have a work space I'm not only proud of, but is a much nicer environment than any competition. Now it's just a matter of hammering my name all over. All takes time, just didn't think something so simple would generate such a decent response.

Link to comment
Share on other sites
Guest Malcolm E Boo

Guest Malcolm E Boo

Posted
Posted
Well done. Pleased for you.

I can never tell if it's sarcasm or genuine with you Malcolm. Luckily I respect you while at the same time could care less about which it is :lol

It ain't sarcasm

Link to comment
Share on other sites
Slick

Slick

Posted
Posted
It's amazing how sometimes the simplest things are the most effective ... hope it keeps working for you :dunno
Well done. Pleased for you.

I can never tell if it's sarcasm or genuine with you Malcolm. Luckily I respect you while at the same time could care less about which it is :dunno

:thumb

Thanks! Just a piece of the puzzle. Over time it'd be nice to associate my business name with the service you know. These work well for that for now. Was steady before, picking up a lot more now. I finally have a work space I'm not only proud of, but is a much nicer environment than any competition. Now it's just a matter of hammering my name all over. All takes time, just didn't think something so simple would generate such a decent response.

:blink: Lets see a pic of the ones you are putting up!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    autocut-tech

    tinttek

    filmvinyldesigns

    ride wrap

    Lexen

    d2iwindowfilm.com

    tintwiz

    signwarehouse

    martinmetalwork.com

  • Activity Stream

    1. 4

      IR or UV Coating on glass.

      The coating can be removed by "dry scraping" with stainless single edge razor blades, but it is very time consuming and tedious. The coating comes off like a super fine powder. If done correctly there is no damage to the glass and you can tint it just fine after a thorough cleaning. I scraped the drivers door clean after making the mistake of scratching the coating but I did not scrape the passenger side. After tinting you could not tell the difference between the two.
      Bham in Window Tinting - General Discussion
    2. 4

      IR or UV Coating on glass.

      that's not a good choice
      Windsor in Window Tinting - General Discussion
    3. 4

      IR or UV Coating on glass.

      Sure looks like auto glass technology is advancing. I remember the coating on Lexus and some Toyota models could be removed with a glass polish. It took some effort to get to the glass itself and that was an anti-fog coating technology. This IR/UV coating is looking like it is more robust. I wouldn't want to be the one experimenting with whatever product to attempt removal of it. The UV rating is 99%+ reduction, but they limit what they say about IR performance to: Mitigates sense of intense heat on the skin ... Controls rising cabin temperatures. The link is to a company that apparently is deep into providing glass with this coating and they certainly limit info. Take a look for yourself. This appears to be something that could/would expand to more brands/models. It sure is going to put a new slant on selling film and installing film to cars. https://www.cgc-jp.com/products/search_category/automotiveglass/ircut.html
      Tintguy1980 in Window Tinting - General Discussion
    4. 4

      IR or UV Coating on glass.

      We run our hand across the glass since you can feel the coating. Basically, if it does not feel like normal glass, assume it has the coating.
      DynamicATL in Window Tinting - General Discussion
    5. 0

      Independent Contractors needed for Security Film Project- Houston

      We have an immediate need for a couple of installers for a large security film project with DOW located south of Houston. Must be a US citizen and be able to pass a drug and alcohol test. Please contact appliedwindowfilm@gmail.com for more details.
      awft in Classifieds • Employment • Marketplace
    6. 4

      IR or UV Coating on glass.

      I'm sure you are aware of this problem - that Lexus and some other manufacturers decided to install this super sensitive coating to the inside of the glass, that cannot be razor scraped at all. I had one a couple years ago and I had no idea what I was getting into you, and figured it was a one-time deal where the manufacturers realized what a stupid idea it was, & wouldn't do it anymore. Well, a week ago I had a brand new all electric Subaru SUV. It had the exact same thing on the front 2 windows - IR or UV coating that cannot be touched ! Didn't know about it & gouged the coating with my razor blade ... SO ... Does anyone know or have access to some sort of a complete list of these vehicles? I was informed by my sales rep that anyone using the core software from Llumar gets these notes about potential problems with the software - I don't understand why all Llumar dealers don't get the same updates. I was completely unaware of this and it's going to cost me quite a bit of money to fix it because even though I didn't do anything wrong, it did happen at my shop!
      mrsunshades in Window Tinting - General Discussion
    7. 0

      Mutoh Plotter

      Anyone used/using a Mutoh VC-2 plotter for tint? I have one I am using for vinyl and want to buy a second cutter just for tint. I am familiar with the Mutoh and would like to keep my equipment the same if possible. Just looking for some recommendations on how it does. Thanks!
      Hookedup in Plotters and Cutting Systems
    8. 4

      Reveal Molding/Belt Moldings

      I never thought about that. That's a good idea for sure
      Nlaga in Paint Protection Film, Clear Bra Forum
    9. 4

      Reveal Molding/Belt Moldings

      If you have that many, trace a pattern and send it to DAP. They are super quick about scanning and uploading patterns. I have done this with a few custom patterns.
      alberts316 in Paint Protection Film, Clear Bra Forum
    10. 4

      Reveal Molding/Belt Moldings

      For sure great point I will look into that
      Nlaga in Paint Protection Film, Clear Bra Forum
×
×
  • Create New...