Jump to content

what's your time

jh812

Recommended Posts

jh812

jh812

Posted
Posted

I know that this is going to vary on each car but what is everybody's average time on 4 door cars, or just whole vehicles in general by yourself? I am giving myself about 3 to 4 hours and am kinda stuck on that just can't seem to get it any faster.

Link to comment
Share on other sites
  • Replies 45
  • Created
  • Last Reply
Guest maxwax

Guest maxwax

Posted
Posted
Slayer means "dick measuring contest" which is what these threads always become.

I'm a 2 hour guy, there are 45 minute guys and 4 hour guys.

No need to measure dicks here...Ill post pics if needed but let me say this when all the dicks are called to a meeting.....well I'm DICK HEAD!.......WAIT A Minute THAT DON'T SOUND RIGHT ...HEAD DICK.... yep thats better...

Really thought time is of the essence because time is money, but to rush a job just for times sake is a major NO NO 2 to 2.5 hours on a 4 door is average for 1 person up to 3 hours if you pull panels trim etc. then through in dealing with other clients during your tin job.

Really unless you don't know how to schedule your jobs then it can become a problem, over scheduling 5 tint jobs in an 8 hour day each of which is a 2.5 hour job then you throw a 45min lunch break into the mix the 15 min. of restroom breaks. 30 to 45 min of dealing with the public 20 min for each car explaining care of the new tint and receiving payment etc. you get the jest.

What I am trying to say is if all you do is install" do the tinting in general" You could do the same tint job in

1.5 hr to 1.75 hr while some one else is playing front man . what I am trying to say is that their are way too many variables

Link to comment
Share on other sites
Guest maxwax

Guest maxwax

Posted
Posted
Slayer means "dick measuring contest" which is what these threads always become.

I'm a 2 hour guy, there are 45 minute guys and 4 hour guys.

No need to measure dicks here...Ill post pics if needed but let me say this when all the dicks are called to a meeting.....well I'm DICK HEAD!.......WAIT A Minute THAT DON'T SOUND RIGHT ...HEAD DICK.... yep thats better...

Really though time is of the essence because time is money, but to rush a job just for times sake is a major NO NO 2 to 2.5 hours on a 4 door is average for 1 person up to 3 hours if you pull panels trim etc. then through in dealing with other clients during your tin job.

Really unless you don't know how to schedule your jobs then it can become a problem, over scheduling 5 tint jobs in an 8 hour day each of which is a 2.5 hour job then you throw a 45min lunch break into the mix the 15 min. of restroom breaks. 30 to 45 min of dealing with the public 20 min for each car explaining care of the new tint and receiving payment etc. you get the jest.

What I am trying to say is if all you do is install" do the tinting in general" You could do the same tint job in

1.5 hr to 1.75 hr while some one else is playing front man . what I am trying to say is that their are way too many variables

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    autocut-tech

    tinttek

    filmvinyldesigns

    ride wrap

    Lexen

    d2iwindowfilm.com

    tintwiz

    signwarehouse

    martinmetalwork.com

  • Activity Stream

    1. 4

      IR or UV Coating on glass.

      The coating can be removed by "dry scraping" with stainless single edge razor blades, but it is very time consuming and tedious. The coating comes off like a super fine powder. If done correctly there is no damage to the glass and you can tint it just fine after a thorough cleaning. I scraped the drivers door clean after making the mistake of scratching the coating but I did not scrape the passenger side. After tinting you could not tell the difference between the two.
      Bham in Window Tinting - General Discussion
    2. 4

      IR or UV Coating on glass.

      that's not a good choice
      Windsor in Window Tinting - General Discussion
    3. 4

      IR or UV Coating on glass.

      Sure looks like auto glass technology is advancing. I remember the coating on Lexus and some Toyota models could be removed with a glass polish. It took some effort to get to the glass itself and that was an anti-fog coating technology. This IR/UV coating is looking like it is more robust. I wouldn't want to be the one experimenting with whatever product to attempt removal of it. The UV rating is 99%+ reduction, but they limit what they say about IR performance to: Mitigates sense of intense heat on the skin ... Controls rising cabin temperatures. The link is to a company that apparently is deep into providing glass with this coating and they certainly limit info. Take a look for yourself. This appears to be something that could/would expand to more brands/models. It sure is going to put a new slant on selling film and installing film to cars. https://www.cgc-jp.com/products/search_category/automotiveglass/ircut.html
      Tintguy1980 in Window Tinting - General Discussion
    4. 4

      IR or UV Coating on glass.

      We run our hand across the glass since you can feel the coating. Basically, if it does not feel like normal glass, assume it has the coating.
      DynamicATL in Window Tinting - General Discussion
    5. 0

      Independent Contractors needed for Security Film Project- Houston

      We have an immediate need for a couple of installers for a large security film project with DOW located south of Houston. Must be a US citizen and be able to pass a drug and alcohol test. Please contact appliedwindowfilm@gmail.com for more details.
      awft in Classifieds • Employment • Marketplace
    6. 4

      IR or UV Coating on glass.

      I'm sure you are aware of this problem - that Lexus and some other manufacturers decided to install this super sensitive coating to the inside of the glass, that cannot be razor scraped at all. I had one a couple years ago and I had no idea what I was getting into you, and figured it was a one-time deal where the manufacturers realized what a stupid idea it was, & wouldn't do it anymore. Well, a week ago I had a brand new all electric Subaru SUV. It had the exact same thing on the front 2 windows - IR or UV coating that cannot be touched ! Didn't know about it & gouged the coating with my razor blade ... SO ... Does anyone know or have access to some sort of a complete list of these vehicles? I was informed by my sales rep that anyone using the core software from Llumar gets these notes about potential problems with the software - I don't understand why all Llumar dealers don't get the same updates. I was completely unaware of this and it's going to cost me quite a bit of money to fix it because even though I didn't do anything wrong, it did happen at my shop!
      mrsunshades in Window Tinting - General Discussion
    7. 0

      Mutoh Plotter

      Anyone used/using a Mutoh VC-2 plotter for tint? I have one I am using for vinyl and want to buy a second cutter just for tint. I am familiar with the Mutoh and would like to keep my equipment the same if possible. Just looking for some recommendations on how it does. Thanks!
      Hookedup in Plotters and Cutting Systems
    8. 4

      Reveal Molding/Belt Moldings

      I never thought about that. That's a good idea for sure
      Nlaga in Paint Protection Film, Clear Bra Forum
    9. 4

      Reveal Molding/Belt Moldings

      If you have that many, trace a pattern and send it to DAP. They are super quick about scanning and uploading patterns. I have done this with a few custom patterns.
      alberts316 in Paint Protection Film, Clear Bra Forum
    10. 4

      Reveal Molding/Belt Moldings

      For sure great point I will look into that
      Nlaga in Paint Protection Film, Clear Bra Forum
×
×
  • Create New...