Mobile Peel Board

Kelley97 · November 14, 2011

There is a link on here somewhere where a neat peel board was built using PVC pipe as the frame. It made it where you could take it apart for transport. I will try to find it and post the link.

Kelley97 · November 14, 2011

There is a link on here somewhere where a neat peel board was built using PVC pipe as the frame. It made it where you could take it apart for transport. I will try to find it and post the link.

November 20, 2011

^{Heres my MOBILE peel board. Very straightforward but does the job for mobile work, and folds up a slides into van easily and doesnt take up much more. 1 sheet of perspex + a pull out stand}

November 20, 2011

You don't want your board horizontal. Airbourne dust falls downwards and WILL get in to your film and ultimatly into your job.

Try to make sure your board is a s near to vertical as poss.

Sorry if I am teaching you to suck eggs,

November 20, 2011

Cheers for the tip malc.

The main reason i take this mobile peel board with me is just for ease of rolling film out the box, and also so i dont have to cut on the car, after iv shrunk i just mark where to cut then take film to peel board and cut on there instead of car.

So to reduce airboure dust falling down i could simply transfer to outside of window and peel liner there?

November 20, 2011

Sy@IMAGE · November 21, 2011

I made a 6 x 4 frame out of wood and bonded a pvc door glass to it works a treat its an A frame which carries all my tools and has a drip dray at the bottom

I took inspiration from the Llumar one i used when i did the course

Ill try and get a pic up

Sy@IMAGE · November 21, 2011

On 10/8/2011 at 1:10 PM, VIP tint + glass said:

we make them out of metal. wall mounted racks and roller racks. you can see the roller in the pick we have 4 of them. they hold glass 46x90

we prefer them on an angle also, makes it easier to cut on and transfer IMO

Im liking the Llumar t shirt :drool