Jump to content

Cutter cuts back to origin during run

Guest mazz

By Guest mazz
January 27, 2012 in USCutter

Recommended Posts

Guest mazz

Guest mazz

Posted January 27, 2012

- Report
- Share

Posted January 27, 2012

I am a novice with my machine, a USCutter sc40 with FlexiSTARTER and have run into my first problem.

Randomly during a cut it will return to the starting point then continue back to where it left off then continue on cutting. This wouldn't be a problem if it didn't cut the whole time it travels to the origin and back. It does it randomly at different points for the same pattern. Sometimes there is no problem at all. Why would it all of a sudden do this?

Thanks in advance,

Mike

Link to comment

Share on other sites

xstudiox

Posted January 27, 2012

- Report
- Share

Posted January 27, 2012

Go to the uscutter website and look for the forums there, they seem to be VERY active. Will have a better chance at getting your question answered.

Link to comment

Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Sponsored by
Activity Stream
1. 4
  
  Air80 vs Stratos70 Windshield
  
  Glare reduction primarily. I have a sedan in the country full of jacked up pickups with super bright headlights. I guess why I ask is I see a lot of people say factory glass is 70% then air80 (80%) would be like 70x0.8 = 56% which seems pretty dark. Does that sound accurate to you? thanks
  
  10 hours ago in Window Tinting - General Discussion
2. 4
  
  Air80 vs Stratos70 Windshield
  
  What is your goal for the FWS? How much risk are you willing to take? I did not care to ask to meter it. Going darker can make it hard to see something on the highway when driving at night like, debris, puddles(hydroplane), potholes, I don't know about you but I drive fast and I need to see the road. I just wanted solar energy rejection, and UV protection for leather interior.
  
  10 hours ago in Window Tinting - General Discussion
3. 4
  
  Air80 vs Stratos70 Windshield
  
  Yeah I hear you. That’s why I’m avoiding the 50%. Curious did they meter it after installing it? Wondering what it comes back at.
  
  11 hours ago in Window Tinting - General Discussion
4. 4
  
  Air80 vs Stratos70 Windshield
  
  I have Air80 on FWS, 35% on 4 doors, 5% on 3rd row and hatch. I am happy rejecting some solar energy and having no visibility issues at night. The 15% you have will make the FWS look darker I assume. During the day it would not be a big difference, only at night. I know a FWS ticket is $$, I didn't want to give a bored cop an excuse to pull me over. Or have the chance to notice the FWS while being pulled over for something else. The less I talk to cops the better.
  
  11 hours ago in Window Tinting - General Discussion
5. 4
  
  Air80 vs Stratos70 Windshield
  
  Hey all, debating between the 2 films. Wondering if anyone can give me some insight between the 2 for the windshield. The rest of the car has 15% pinnacle. thank you.
  
  11 hours ago in Window Tinting - General Discussion
6. 0
  
  Looking for mobile installer in phx and surrounding area's
  
  Looking to set up a mobile window tinting partnership. Any installers already doing mobile jobs I'd like to speak with you and see if we can't work out a deal. I would get jobs in to be done by you. Adding to your work flow by increasing your installs through out the year. Thank you, Justin (602) 770-6910
  
  12 hours ago in Classifieds • Employment • Marketplace
7. 12
  Can this be fixed? Wondering how this happens
  
  Any impact from polishing, if the mar responds to polishing, would result in no or little visible trace. Anyone experienced in buffing glass will likely say, no guarantees; unless they've experienced the same mar on glass.
  
  1
  
  23 hours ago in Window Tinting - General Discussion
8. 7
  Boat window tinting tips
  
  I use(d) these that are readily available through grocery stores; on installs that should not have a blade running across their surface. https://www.walmart.com/ip/Scotch-Brite-3PK-Dobie-Cleaning-Pad/580762256?wmlspartner=wlpa&selectedSellerId=101033794&gclsrc=aw.ds&&adid=22222222227580762256_101033794_160178497084_20981201920&wl0=&wl1=g&wl2=c&wl3=689850595863&wl4=pla-2274697737319&wl5=9008682&wl6=&wl7=&wl8=&wl9=pla&wl10=255470249&wl11=online&wl12=580762256_101033794&veh=sem&gad_source=1&gclid=EAIaIQobChMIyo335LbOhQMVo0tHAR1HpQC8EAQYASABEgKydfD_BwE Need to know whether the boat has glass or does it have plexiglass (acrylic) or Lexan (poly-carbonate). Glass is not worrisome, the other two are. Plexi will blister from out-gassing in no time at all, whereby, Poly-carbonate is a crap shoot as to when and how serious, if any, blistering of film occurs. Both Plexi and Ploy may also be difficult to remove, if the need arises down the road mainly getting the adhesive of without damaging the surface. Both should not be warranted given the aforementioned potentials and these conditions should be discussed with the owner.
  
  1
  
  23 hours ago in Window Tinting - General Discussion
9. 12
  
  Can this be fixed? Wondering how this happens
  
  thank you - great to know polishing should remove it. 🙏 I appreciate you and all the others who took the time to reply.
  
  Yesterday at 02:48 AM in Window Tinting - General Discussion
10. 12
  Can this be fixed? Wondering how this happens
  
  We've seen it on new vehicles, polishing it should remove it. Definitely not the shops fault.
  
  1
  
  Yesterday at 12:37 AM in Window Tinting - General Discussion

×

×

Create New...