Guest Jose Escobar Posted March 3, 2014 Report Share Posted March 3, 2014 Good afternoon. I have a Rolland VS-540 machine and I want to know if I can use my machine to cut a predetermined size of window Film, but not cut only the material, I want to cut also the liner, is this possible with my machine? I have tried adjusting the pressure of the blade but was not successful, I have been led to believe that I can adjust the depth of the blade, but not sure of this. Thanks, Jose Link to comment Share on other sites More sharing options...
mikebrook_07 Posted March 3, 2014 Report Share Posted March 3, 2014 Not possible. Link to comment Share on other sites More sharing options...
Jake Posted March 3, 2014 Report Share Posted March 3, 2014 If you cut all the way through the plotter has nothing to grab to feed the film through on the rollers. Link to comment Share on other sites More sharing options...
mikebrook_07 Posted March 3, 2014 Report Share Posted March 3, 2014 Why would you want to cut all the material? It only takes seconds to weed a pattern Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.