lambchop13 Posted December 30, 2015 Report Share Posted December 30, 2015 Not done one of these before so i thought i'd share…. tailgate's a bit tight so i removed the rear trims(easy peasy) door card removed has to be the easiest ever, torx screw behind handle pull, and the whole card lifts up,i rested it on the bottom "tags" to save unplugging all the cables which still gave good access to the glass. the weather strip is all one piece so just pulled it out of the way.. ps the glass is soft so may score when cutting template BEWARE Link to comment Share on other sites More sharing options...
lambchop13 Posted December 30, 2015 Author Report Share Posted December 30, 2015 another picture Link to comment Share on other sites More sharing options...
Booms Posted December 30, 2015 Report Share Posted December 30, 2015 Hot ! Link to comment Share on other sites More sharing options...
TomTint Posted December 30, 2015 Report Share Posted December 30, 2015 I got my wife one of those. ... I'm no longer a auto tinter, but no need to remove any panels. Only the front 1/4 windows were tight. .02 Link to comment Share on other sites More sharing options...
lambchop13 Posted December 31, 2015 Author Report Share Posted December 31, 2015 Didn't do front windows Tom but the rear 1/4 where a bit of a bugger, I took the tailgate panels off to give me more room and as i had all day to do it i thought i'd explore a little Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.