California Films Installers - Auto & Flat
-
Sponsored by
.png)
-
Activity Stream
-
4
IR or UV Coating on glass.
The coating can be removed by "dry scraping" with stainless single edge razor blades, but it is very time consuming and tedious. The coating comes off like a super fine powder. If done correctly there is no damage to the glass and you can tint it just fine after a thorough cleaning. I scraped the drivers door clean after making the mistake of scratching the coating but I did not scrape the passenger side. After tinting you could not tell the difference between the two.- 1
-
-
4
-
4
IR or UV Coating on glass.
Sure looks like auto glass technology is advancing. I remember the coating on Lexus and some Toyota models could be removed with a glass polish. It took some effort to get to the glass itself and that was an anti-fog coating technology. This IR/UV coating is looking like it is more robust. I wouldn't want to be the one experimenting with whatever product to attempt removal of it. The UV rating is 99%+ reduction, but they limit what they say about IR performance to: Mitigates sense of intense heat on the skin ... Controls rising cabin temperatures. The link is to a company that apparently is deep into providing glass with this coating and they certainly limit info. Take a look for yourself. This appears to be something that could/would expand to more brands/models. It sure is going to put a new slant on selling film and installing film to cars. https://www.cgc-jp.com/products/search_category/automotiveglass/ircut.html- 1
-
-
4
IR or UV Coating on glass.
We run our hand across the glass since you can feel the coating. Basically, if it does not feel like normal glass, assume it has the coating. -
0
Independent Contractors needed for Security Film Project- Houston
We have an immediate need for a couple of installers for a large security film project with DOW located south of Houston. Must be a US citizen and be able to pass a drug and alcohol test. Please contact appliedwindowfilm@gmail.com for more details. -
4
IR or UV Coating on glass.
I'm sure you are aware of this problem - that Lexus and some other manufacturers decided to install this super sensitive coating to the inside of the glass, that cannot be razor scraped at all. I had one a couple years ago and I had no idea what I was getting into you, and figured it was a one-time deal where the manufacturers realized what a stupid idea it was, & wouldn't do it anymore. Well, a week ago I had a brand new all electric Subaru SUV. It had the exact same thing on the front 2 windows - IR or UV coating that cannot be touched ! Didn't know about it & gouged the coating with my razor blade ... SO ... Does anyone know or have access to some sort of a complete list of these vehicles? I was informed by my sales rep that anyone using the core software from Llumar gets these notes about potential problems with the software - I don't understand why all Llumar dealers don't get the same updates. I was completely unaware of this and it's going to cost me quite a bit of money to fix it because even though I didn't do anything wrong, it did happen at my shop!- 2
-
-
0
Mutoh Plotter
Anyone used/using a Mutoh VC-2 plotter for tint? I have one I am using for vinyl and want to buy a second cutter just for tint. I am familiar with the Mutoh and would like to keep my equipment the same if possible. Just looking for some recommendations on how it does. Thanks! -
4
Reveal Molding/Belt Moldings
I never thought about that. That's a good idea for sure -
4
Reveal Molding/Belt Moldings
If you have that many, trace a pattern and send it to DAP. They are super quick about scanning and uploading patterns. I have done this with a few custom patterns. -
4
Reveal Molding/Belt Moldings
For sure great point I will look into that
-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.