Jump to content
filmvinyldesigns.com
Tint Tek 2020
spacer
filmvinyldesigns.com
Tint Tek 2020
spacer
Sign in to follow this  
Tinter J

Saga Contour Stepper 1350i

Recommended Posts

Does anyone have any experience with these? I have the opportunity to pick a used one up very cheap but don't want to waste my time or money if it won't cut Tint.

Share this post


Link to post

I bought one of the 1350iP Saga plotters to use with my tinttek program based on several recommendations. I have been told that many people use them and they work fine.  The "P" is same plotter just newer model. First thing I didn´t like is it is a stepper motor which means it is loud and slow. My main issue was I never could get the force right...it would cut fine on half of the pattern and then score the other side..It does not auto advance after cutting and the software cannot read or poll the size of the material you are cutting while using this plotter. I tried for a week to get it dialed in...Cutterpros.com is one of the main sites that sells them. Tech support is hard to get in touch with. I sent it back and went with one of the the Vinyl Express Q42 plotters from Sign Warehouse. It is a rebadged Graphtec and worth all the extra money..If it were me I would stay away from Saga for tint. Just my experience...your mileage may vary. 

 

 

Edited by Sunbreakers

Share this post


Link to post
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...