Water bubbles In PPF

[drtint 169]

After thinking about it, maybe your squeege is to hard, if so, try a softer squeege. I use to get that on lower fronts with a yellow and went to the green Turbo... problem solved

[Midtown Houston 444]

1 hour ago, drtint said:

After thinking about it, maybe your squeege is to hard, if so, try a softer squeege. I use to get that on lower fronts with a yellow and went to the green Turbo... problem solved

Use the new pink from fusion...it is the best...

[Matteo 0]

13 hours ago, Midtown Houston said:

Use the new pink from fusion...it is the best...

You mean this one?

Fusion

 

You don't have bubble using this one? Mark? 

 

[tintme69 5]

I used the new orange fusion squeegee for the first time on a full vehicle install and got hella bubbles on my first panel. Went back to my green and no bubbles. Now I’ve just gotta figure out how to get these fu*^ers out 😕😩. I mean I went over the panel 3 times, pushed hard. Came back later and there were like 5 small bubbles. It’s a full pickup job. Only issue with the greens is I went through a batch that would scratch the film brand new. That’s why I tried the fusion orange with handle. Idk not saying they’re bad, but it left me in a bad situation. 

Edited January 12, 2019 by tintme69
Left out a word

[XPEL Jeff 172]

On 1/11/2019 at 7:44 PM, tintme69 said:

I used the new orange fusion squeegee for the first time on a full vehicle install and got hella bubbles on my first panel. Went back to my green and no bubbles. Now I’ve just gotta figure out how to get these fu*^ers out 😕😩. I mean I went over the panel 3 times, pushed hard. Came back later and there were like 5 small bubbles. It’s a full pickup job. Only issue with the greens is I went through a batch that would scratch the film brand new. That’s why I tried the fusion orange with handle. Idk not saying they’re bad, but it left me in a bad situation. 

 

Either of those squeegees should work, so it really is going to come down to technique.  Squeegee pressure is one facet, but there's also squeegee angle, overlapping strokes, working in sections, viewing from different angles, addressing bodylines, etc.

[tintme69 5]

The one I bought had a handle. I’ve never used one with a handle and I think it keeps it from going over the curves as well. I went back to my regular green squeege and no issues   

[Midtown Houston 444]

Try this...no water left behide...email me at Norngllc@gmail.com for info

[Tint Slayer 538]

Are you writing "behide" on purpose?