-
Sponsored by
.png)
-
Activity Stream
-
5
Can this be fixed? Wondering how this happens
then Dano was correct about trying to polish it out with the proper glass polish. Much care and experience is needed for this type of repair. -
0
Attn Atlanta Wrappers, Tinters, and PPF Installers.
Atlantas #1 car customization shop is looking to improve our team. We are looking for dedicated installers who take pride in their work and being number 1 in the industry. Contact me at 678-612-3986 -
5
Can this be fixed? Wondering how this happens
As far as I can tell @Bhamit seems to be on the outside of the glass.- 1
-
-
5
Can this be fixed? Wondering how this happens
I agree with @Dano except that it is on a factory tinted glass. I still think it's a marr in the glass but not sure why it is showing up like it is unless it is on the outside. Just seems off/odd to me. I did see the same type of thing on a front door (laminated) of a Grand Cherokee the other day. Made the damage really stand out after tint but that was on a clear window, not factory tinted. -
5
Can this be fixed? Wondering how this happens
That looks like a mar on the surface, hard to see until the tint is installed due to adding contrast. Not likely that the installer is at fault. You might be able to polish some of that out. Use a professional glass polishing compound and maybe ask a car detailer to do it.- 1
-
-
5
Can this be fixed? Wondering how this happens
One more photo (not up close) to give a better view of its scope/size. -
0
Experienced tinter and ppf installer needed in Atlanta
When it comes to high end and performance, we are the one. Looking for experienced film and ppf installer. We are a Llumar dealer. Experienced in high end and references required. We are opening a new super store in May! Experienced with plotter and free hand. Send resume to kevin@butlertire.com (706) 223-0794 -
-
5
Can this be fixed? Wondering how this happens
Brand new vehicle, went to a reputable tint shop and had Formula One Stratos installed. When all was done the shop pointed out to me that they noticed an area on the back passenger window that looked like adhesive or residue but it would not come off. They said maybe it came from the factory this way or something? Running your fingernail over the area you can very barely feel a difference. What is weird it's almost a perfect arch and looks like a white residue with a sort of pattern to it. You can see it more so at certain angles and under brighter light. I have tried to clean it off with glass cleaner to no avail. I will attach a photo but it's kind of hard to show it accuratelty so apologies in advance. I'd love to hear your input on the following: 1. Is there any way possible that the tint shop somehow caused this? I know tint goes on the inside but is there any prep, adhesive, heating to shrink etc.. that might have left this mark? In all fairness it's possible it was there before I tinted the vehicle but I am just surprised I would not have noticed it since the rear windows came factory dyed (I think someone said 20-25 measured) and looking from both the outside and inside I never saw it. The tint added was 50 so certainly darker and thus blemishes more visible. 2. Is something like this fixable? Assuming it can maybe be buffed out or something? If doing so would it impact visibility in that area when looking out or in? Worst case I just live with it. Thank you so much for any and input. -
0
Help with selecting the film and installer in So Cal
Good afternoon, Just got a 2016 Subaru WRX and want to get a good quality ceramic without breaking the bank. My budget it about $300-$400. Just want a reliable tint with good grey shade and good heat rejection. Thinking about 40% back 3 windows and 60% 2 frond windows. Any suggestion is greatly appreciated.
-
Recommended Posts