Corvette 81 mod i think

[Tintsanta]

Hello, i used llumar atr 5 on backwindow. The shrinking was all flat and Nice  . Was pefeckt .

 

but when install time IT just lifted the side and botom. To much tension in the film.

Started the senter down and up. Then the side AS i do every time. 

 

But this was my First vett back window. 

 

Did i install IT wrong?  Tips too avoid thension? 

 

Maybe try with cb 5 stronger glue? 

[Super Dave]

So there could be several different things going on here. Off the top of my head, I generally squeegee a window like that different than a regular window. Start with your line down the center, then all squeegee strokes to the side follow that U-shape of the window. You want to get that bottom edge sealed up without tension then worry about the top last.  It’s kinda hard to write it down, but if you’ve done those old camaro’s, same principle. Was an easy window, but if you did it wrong, you would fight the film rolling off all day.

[Tintsanta]

[Tintsanta]

Tryed 4 times now:/  

now i dont Get a Good shrink outside :/   I dont Get IT flat.   Too much tension in botom and and the side.  IT just lift. 

[Tintsanta]