New Body 2019 Ram 1500

Super Dave · July 14, 2018

Hey Boss, wasn’t sure what to do with this one since it’s not technically Dodge anymore.

It’s definitely a full redesign for the better, at least for tint anyway. Seals all pull easy, I did not remove any screws, but I’m sure there’s one behind the handle if it makes you feel more comfortable. Just pop back the top outside of each panel and slide the seal out. Regular Chrysler plastic clips. The panel does not have the metal clips across the gasket though. Just an inch or two lower are a line of plastic clips securing the top portion of panel. See Pics....

best part= no side felts! And no shrinking on roof, sides, or B-glass ( the top edge of the slider is super tight and must be cut perfectly) everything else including roof has plenty of room. 3rd pick is looking down after the seal is out, showing the screw behind the handle

4th sunroof border

5th is border of slider

jh812 · July 14, 2018

:thanks

pbalentine · July 14, 2018

Nice to see the felts gone. The sides get tight when the felts taped off.

Super Dave · July 14, 2018

44 minutes ago, pbalentine said:

Nice to see the felts gone. The sides get tight when the felts taped off.

Yes, and if they are a few years old your hands are black by the time your done taping them.

redgar826 · July 14, 2018

Here’s the top edge of a rear back sliding glass. As stated above, absolutely no room to tuck or overlap the film. The small spot you may see in these pics looks like a boarder but it’s just a reflection off the plastic piece.

Super Dave · July 14, 2018

Thanks, my picture of that was not good - couldn’t tell what it was so I didn’t post it

redgar826 · July 14, 2018

All is good, I haven’t had a chance to tint one of these back windows, this truck just came for matching fronts so I peeked at the rest. When I do get to do one, I’m going to do my best to bump it up far as I can and see what it looks like. At least there is a dot matrix there but still that may make things better or worse! I will try to see if that plastic piece can be moved at all to tuck but it sure didn’t feel or look like it would when I checked it out the first time.