Hiring automotive installer. Southern California locations.
-
Sponsored by
.png)
-
Activity Stream
-
12
Can this be fixed? Wondering how this happens
Any impact from polishing, if the mar responds to polishing, would result in no or little visible trace. Anyone experienced in buffing glass will likely say, no guarantees; unless they've experienced the same mar on glass.- 1
-
-
7
Boat window tinting tips
I use(d) these that are readily available through grocery stores; on installs that should not have a blade running across their surface. https://www.walmart.com/ip/Scotch-Brite-3PK-Dobie-Cleaning-Pad/580762256?wmlspartner=wlpa&selectedSellerId=101033794&gclsrc=aw.ds&&adid=22222222227580762256_101033794_160178497084_20981201920&wl0=&wl1=g&wl2=c&wl3=689850595863&wl4=pla-2274697737319&wl5=9008682&wl6=&wl7=&wl8=&wl9=pla&wl10=255470249&wl11=online&wl12=580762256_101033794&veh=sem&gad_source=1&gclid=EAIaIQobChMIyo335LbOhQMVo0tHAR1HpQC8EAQYASABEgKydfD_BwE Need to know whether the boat has glass or does it have plexiglass (acrylic) or Lexan (poly-carbonate). Glass is not worrisome, the other two are. Plexi will blister from out-gassing in no time at all, whereby, Poly-carbonate is a crap shoot as to when and how serious, if any, blistering of film occurs. Both Plexi and Ploy may also be difficult to remove, if the need arises down the road mainly getting the adhesive of without damaging the surface. Both should not be warranted given the aforementioned potentials and these conditions should be discussed with the owner.- 1
-
-
12
Can this be fixed? Wondering how this happens
thank you - great to know polishing should remove it. 🙏 I appreciate you and all the others who took the time to reply. -
12
Can this be fixed? Wondering how this happens
We've seen it on new vehicles, polishing it should remove it. Definitely not the shops fault.- 1
-
-
12
Can this be fixed? Wondering how this happens
no, aside from window cleaner I’ve not tried anything else yet like goo gone, a razerblade, etc… I’ll probably leave that to the detailer. question: when polishing glass will it impact the visibility after? I guess I’m now weighing between having them try to correct it or just leaving it be. -
-
1
Geoshield vs Maxpro
Global HP and Ceramic. Using it full time for seven years and not a single failure that wasn't my fault. -
7
Boat window tinting tips
Where can i get a white scrubbie at locally like stapels, home depot, etc. dont have one in my toolbox yet -
7
Boat window tinting tips
I start those at $750 and go up. Best advice is no cutting on the glass and white scrubbie only, no cleaning blades. That glass is super soft. You may want to use a film liner to make a template to cut your patterns. -
1
Geoshield vs Maxpro
Hi! I’m new to the tinting world. Just completed a 5 day tinting course and want to purchase some films to start my mobile tinting. We trained with Geosheild, but there was a lot of talk about Maxpro and how it was good as well. Does anyone have experience with both of these? Which one is better to work with and easier to shrink? Prices on both are pretty close to each other. Any advice would be greatly appreciated. thank you!
-
Recommended Posts