3M Training
xpel
suntek
spacer
3M Training
xpel
suntek
spacer
Sign in to follow this  
Guest Jtint

CE-6000-120/ adjusting blade depth and force for wondow tint

Recommended Posts

Guest Jtint

Im having some difficulty adjusting my.blade and force to properly cut my window film..to NOT cut through the film, and to plot cleanly so as to weed cleanly... Any help out there..asap..

Share this post


Link to post

Your  issue can be a number of things causing the cutter not to cut properly.    

 

Dull blade or broken blade tip.  I have seen a plotter blade last over a year and I have seen one fail in 3 days.  I have had really good luck with the Clean Cut blades.  

http://cleancutblade.mybigcommerce.com/graphtec-cb09u-25-m/

 

Cut strip.  Is there a groove in it?  Are there nicks in it?  If your unsure replace it.  

 

Cutter head.  Is the cutter head tight on the guide bar?  

 

As far as settings- I run my Graphtec cutter, when cutting tint on 35 speed and 15 to 16 pressure,  on a new blade.  The pressure will vary on the manufacturer of your film.  

 

Once the blade depth is set correctly on a blade you should never need to change it.  When the blade gets dull, up the pressure, don't change the depth.  .  

 

Good luck.  

Share this post


Link to post
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  


3M Training

Contact TintDude tintdude@gmail.com