Vinyl Express Q series help

[Tintchick]

I have a vinyl express Q series and it’s not cutting great. I use SunTek HP, Carbon, and STD Pro. Sometimes it doesn’t cut deep enough and other times too deep, all on the same pattern. What should my settings be?

[Old timer]

I run a 25 degree angle blade. My Force setting on a new blade is around 13. Worn in a little it can run as high as 17 or 18. If you don't have a Nick in your tape underneath your film. It's most likely your blade holder. By 3 they suck anymore.

Edited March 7, 2021 by Old timer

[Tintchick]

Thank you