GETITDONE! 0 Report post Posted April 7 in using 70% alcohol and i mix it in a 32oz bottle with distilled water i put 10oz of alcohol and the rest with water is it better to use more or less alcohol mix with water? Share this post Link to post
highplains 1,351 Report post Posted April 10 I would use a little less, at that dilution you're ending up with a roughly 21-22% alcohol solution which is on the strong side. Personally I'd try to go with about 8oz and the rest distilled water which should put you into the 17-18% range. That's where I personally mix to with good results although depending on what film you're using it may still be a little strong, if I remember correctly suntek doesn't recommend more than 10% as an example. Share this post Link to post