21 ram windshield

[tintsince97]

need help with 21 ram.  think the bcm may have gotten wet when tinting the windshield.   Any recommendations?///

[Dano]

Leave the door windows cracked a few inches and park it in the sun for a few days. It will likely dry out and be ok. Wouldn't hurt to unhook the battery while you're at it. 

[Whyme]

I agree it needs to dry out . Some heat will help. Did you use a microfiber rope at the bottom of the windshield when you installled . You should be doing that . Huge lifesaver . Especially for vehicles like the early Tesla model 3’s that had no protection for water under the windshield on the inside . 

[Dano]

16 minutes ago, Whyme said:

use a microfiber rope  

Agree. For some I'll switch out to a second rope thats dry between prep and install. Also I pull the pillar covers and stuff in a microfiber towel if there's room.

[tintsince97]

thank you all.   We got it dried out with the help of a tornado from the detail bay.  I will definitely remember to use that soak rope and towel every time!

[Dano]

[pbalentine]

I believe on the Ram 20+  theystopped

covering the computer module on the drivers side under the dash to the far left. You’ll want to cover that. Also, put two soak ropes and dont use the mini rope. Its too small and fits loose.