Jump to content

Midtown Houston

Member
  • Posts

    718
  • Joined

  • Last visited

Everything posted by Midtown Houston

  1. Removal of sweep and any obstacle in the way...will make your life easier and cleaner install...We remove everything we can for tint and ppf..
  2. This car took us about 4 hours to tint. We had to remove the rear deck on this 2019 which we never had to do on any Charger. The back glass gave us so much problems even after wet sanding it with 2000 grit. It just didn’t wanna stick on the bottom. Even after removing the rear deck we still had a hard time due to the sub woofer sticking up so high. There also alots of electronic that need to be cover up back there so be careful.
  3. This vehicle is not for beginner....so do not try it. Take about 25-30 min to remove everything needed to tint this Wagon and another 25-30 min to put it back together.....There go a hour so charge accordingly. You will not be able to tint this vehicle without removing the sweep. This G Wagon is a Monster....If I keep working this hard, maybe I can own one. Follow us on instagram @autofilmspecialists and @midtownmotortrends to see detail of our work. 1. Remove blk screw on top of door pin 2. unscrew the door pin and push down on it to lock position 3. remove torque screw on door holder (what ever this thing is call....hand/arm rest) 4. pop panel back to reveal 5 phillip chrome screw and unscrew them. 5. remove sweep Back Glass. 1. pop top center panel back 2. remove 3rd bake light screw (4 total screw) Rear Quater: 1.....this is easy....just remove gasket with your hand.... Last step: Drink a Heineken and thank me for making your life easier Today.
  4. Warning....Warning... Tesla have issue a warning to some window film manufacturers. This was issue to 3M.....The computer is located below the A-Pillar and will get damage if liquid touch the pcu. They have state that it cost them over 10k to replace for some Tesla owner. So be careful guys.... It is a design flaw that they will be changing due to this. We have alway took the extra precautions when doing windshield and we have done 4 Model 3 and have been lucky....cross my finger.
  5. This is how you remove the sweep for an 2018 Audi Q5. - Get a ply tool and remove the panel right below and next to the door handle. You must remove it first from the lock/unlock button. - Pull the panel toward the front of the door to remove it....If you try to pull it out, it will break. - There are 2 toque screw that need to be remove and you are done.
×
×
  • Create New...