Jump to content

isaiahdrums

Member
  • Posts

    32
  • Joined

  • Last visited

Everything posted by isaiahdrums

  1. Doors - These were pretty hard. I did NOT take off the panels or remove sweeps. The hard part was getting the film in the sides cleanly, so tape over the felt or do whatever you do to have "felt" control. BG - Standard and easy. I put the film under the third brake light at the top of the window with no issues. Windshield - Standard. As always be careful with water, just because of all the electronics. Overall Difficulty: 4/5 Because of doors
  2. Doors - These doors were pretty freaking hard. I didn't pull the panels (to scared to try haha). The front doors have a lot of space it has to get the film into on the sides and it's hard to get it there. back doors weren't too bad. BG - pretty easy to shrink and install. Overall Difficulty: 4/5 because those front doors are hell.
  3. Doors - Decent. Pretty much like any standard coupe. The gaskets were a little tight, but nothing crazy. Make sure to snap or heat shrink of course. BG - super easy! it's the little one inside the cab. no need to snap or heat shrink. Overall Difficulty: 2/5
  4. Hey all, Im starting this topic in order to learn more about flat glass! I personally have a knowledge of application, but I would love to know more about the following: - Tools of choice? - What films can be applied to what type of glass? - What glass should you NOT apply film? - Whats your techniques of choice? - Tips and advice? I live in Florida if that makes any difference to answers. If there's websites or another place on this site that I can find these answers, please direct me! I'm looking to do as much research as possible.
  5. isaiahdrums

    2020+ Soul

    Windows - Super easy. Just like previous models. Take out the sweeps to make it easier on yourself. Pull back gently. I don't ever shrink these side windows. BG - Again. Super easy! Windshield - Pretty easy. Nothing concerning to me personally. Overall Difficulty: 1/5
  6. isaiahdrums

    2018 ES 350

    Gaskets : Front door panels are a pain in the bean sack to pull back!!. Gaskets came out easy. Back doors were easy to pull back. Tinting: VERY easy to tint! The door panels are just ANNOYING! *putting the gaskets back in and putting the back door panels back on without taking the whole panel off was worse than a frog humping your leg!!* pulling the gaskets off the back doors is NOT WORTH IT! Id rate the difficulty a 1 out of 5. 5 meaning the hardest.
×
×
  • Create New...