Bubbles

You have to really think about where you are and where your trying to go. I always look at the parking lot of the place im applying for. If there is a bunch of beaters keep driving and good luck

Still learning slthough i do welding on the side and tube bending as well so could componsate with side jobs. Rent here is very expensive so im going to take my time and look around.  

Go mobile and body shops maybe customers will let you use their garage some guys are mobile on this site???

Call local storage places, some have storage units you can get a car in with doors open and cheaper than full blown rent sometimes, call around and tell them exactly what you want to do, they may have an area you can use per car. I know one location that has an open bay on the weekends, if i use that i give the owner $20 per car i tint. During the warmer weather you could probably use a multi-level public parking garage to at least have a little cover. 

thats what ive been reading. It sucks not having a garage. There are some mini shops around me. Not sure how much they are. Ill check craigslist for shops for rent. 

That sounds good im going to do some calling around. Thanks for all the help. 

I like it. Im a welder by trade and would use 2x3 tubing and what about lighting inside of it. Those blue prints are very nice to better than most of the ones i get. 

If your Jeep had factory tint in the rear, the matching percentage would be right at 20%.  I would suggest no lower than a 30% film to go with the 50% fronts.  

Try our NiRoLL LX Tintlight check us out at http://www.tintlight.com

Boi ain’t that van purdy? Thank you guys! I was sure it was double tape or something removable but you know how it goes. Cannot be too careful! Turned out great! Very clean cut job. 

The vertical felt guides. Like this except all the way up, I just slapped a little on for the example 
 

How much is the discount. I already had my birthday and im still saving. May have to let one of my Schwinn Stingrays go. No there to hard to find. Just save more money

Thanks guys thsts good to know. Bought some yellow frog tape. I love all the tips you guys give me

Agreed, I just happen to be out of the green at the moment 

I like the green tape better. Has more flex to it and sticks much better than blue. Plus, it sticks well cover door switches. 

and you better pray that they don't love their armour all that makes life a nightmare.

Any vehicle that has felt, and not plain rubber, needs tape to contain the felt particles that will fly off during install.  
 
Edit — this needs to be done before any water EVER hits the vehicle.   This is important.  

Yep, thats panel puller for sure. Tucking=you lose!

Pull the door panels or you're going to hate life. Those seals are deep and tight and you'll crease the shit out of your film if you try and two stage them.

Ok im going to get the DVD’s for my birthday. On some of my windows i get contamination or the trim isnt real good. So I just keep putting that piece on because it is practice. I can do a couple windows after work or somtimes only one, and im working outside. I like to come on here and read what you pros are saying.  Also ive been watching you tube and watch the same videos over and over again. How many if any flaws are acceptable on a job. I bought some mid grade film 35%. Thats legal here. Thanks for taking the time to answer 

Thanks for the help guys. Im going to hit up some of my friends at work that have newer 4 door cars and see what happens. Ive tinted my car over 6 times now. Also tinted my wifes and sons car. I bought some SunTek. Super sweet tint.  Been picking up tools little by little and I have a good time tinting. Also Im a welder fabricator and work around 55 hours a week. 

Thanks for the help guys. Im going to hit up some of my friends at work that have newer 4 door cars and see what happens. Ive tinted my car over 6 times now. Also tinted my wifes and sons car. I bought some SunTek. Super sweet tint.  Been picking up tools little by little and I have a good time tinting. Also Im a welder fabricator and work around 55 hours a week. 

Thanks for the help guys. Im going to hit up some of my friends at work that have newer 4 door cars and see what happens. Ive tinted my car over 6 times now. Also tinted my wifes and sons car. I bought some SunTek. Super sweet tint.  Been picking up tools little by little and I have a good time tinting. Also Im a welder fabricator and work around 55 hours a week. 

I bought a mid grade roll from tintdepot. It was 84 bucks 100x20 in. I did the H on the BG. I didnt snap it. Is it when you peel it off then put it back on and look for fingers. Thank you for all the help. 

Thanks for the tip. I left little fingers on the bottom. Ill re tint it this week after work. I bought a 100 ft so i can do it several times until its right. Thanks again