Hey guys!
I began my adventure of window tinting yesterday evening. However, when I came to sliding the film into the side and bottom gaskets, I ran into an issue. As seen in the picture, the door panel rises and sits about 2" above the seal as you approach the side mirror. It makes it rather difficult to tuck the film into the bottom and side gaskets without creasing the film (even with using the uz reach). I tried to tuck the film without the need to remove the door panel, but with no success. Would you guys recommend me to pull the panel or is there a technique you'd recommend without the need to pull the panel. I've seen many say that this is one of the more difficult cars to tint, but I don't mind a challenge
Good news is that I'm enjoying this trade very much! Thanks in advance for the help guys!
