NewYorkTinter
-
Posts
160 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Subscriptions
Posts posted by NewYorkTinter
-
-
Are you looking to relocate an have talent in Clearbra, Window, and wrapping . Salary Based on Knowledge, for the Rite person, willing to assist in Relocating.
If your serious Send message with your info an we will reach out to you
-
Are there still issues with the new design windows scratching cause of no felt ,have one coming in in a few days
-
May the force be with you Luke
-
The installer probably set the unit tachless in other words voltage sensing, and yes you can adjust the crank time or you can have him hook up the tach wire hope that helps
-
Id have it removed and take it to a alarm shop not a chain store
-
you'll need to pull the brain down and find out which alarm you have before anything
-
you would be looking at about --- thats --- to remove without damaging your defroster and --- to retint in one piece you said it was pealing as the seems the pro's 1 piece it
Edited ...No discussion of pricing please, call your local shop.
-
If that unit is the transponder piece (two way remote) and someone is doing for 200 get it done before he wakes up that unit should be selling for at least 450 installed
-
you probably have the factory (so called alarm) still hooked up if so just ground out the factory hood pin switch that should solve the horn honking
-
-
the new ford deisel's dont have a wait to start I could be wrong had one in my shop and didnt have one
-
A universal not likely you need to know if the alarm is factory or aftermarket then you could go from there
-
The way it sounds to me is that you dont have a hood pin switch up front cause if the hood was open the truck wouldn't start and also there should be a shut down manual switch in the car
-
where do I sign up !
-
get them removed you can do the sides yourself as for the rear glass have a pro do it it will save youe rear defrost lines
-
Yeah Invalid item you actually bought it thats one way to make on her getting off
-
Try reseting the ECM remove the negative battery terminal for about 10 min that should get you going
-
If its a new DEI product the starter wire is cut in half probably his conection on the key side came loose thats why you are able to start with the remote and not the key id tell him to start there first good luck
-
Seems like you got all the Bases covered thats what ive been using they all have been great too me lots of luck
-
A really good product to go with is DEI ie.(Viper,Clifford,Valet,Hornet) they carry a great warrantee that will be honered any where there product is sold and the going price around here is 249.00 if you need a pass key module 229.00 without good luck
-
Well if it is the shock sensor you can over ride the shock by arming the alarm then hit the same button you arm again you will hear a second confirming chirp that will tell you the shock is now off thats one way of seeing if you sensor is the prob the only down fall is that you'll have to do it every time you set your alarm good luck
-
do you make house calls once they win the bid or is that and additional charge if you come to them ?
-
2022 Jeep Grand Wagoneer
in Jeep
Posted
Have a new 22 Wagoneer coming in to get the front two to match. Interesting rear glass is a Bronze-ish Mirror effect Looking at what film to use to Match 35%