Filmprolv.com
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Subscriptions
Posts posted by Filmprolv.com
-
-
I cut a whole lot of film today and after getting the roll in place it only walked a quarter inch to the left. Slow precise cuts. Actually today was of the better cuts. I made some disposable shims. I ordered some awhile ago but they were in back order. I guess I need to fashion my own
-
You never want to mislead a customer on their safety, however anything can be compromised. If A feel good bead or beauty bead which i like the ladder of the two make the client happier overall then so be it. That doesn’t mean we oversell the products. With that said I was super skeptical about small beads but they do in fact work for the purpose Which is a forced entry deterrent. They are not designed for bomb blast mitigation. If the bead is ran properly and all the steps are taken such as cleaning the frames with alcohol etc. tooling properly than yes it will work as intended.
-
It’s not a beauty bead bro. That’s a 3/4 inch piece of flexible trim with Dow behind it. There is also tests done with 1/2” beads that do hold long enough. It’s all perspective and subjective. I don’t use absolutes in installations.
-
-
-
Not a half inch on the frame. About a 1/2 total. Glaziers use extremely small beads to hold curtain walls together etc. we have tested small beads and they absolutely work. Sure it won’t pass BBM however it will help with FE attempts
-
Nice job man looks good from here.
-
On 4/10/2019 at 10:50 AM, TomTint said:
Unless your patio door is 20+ years old, it's either tempered or laminated. And no, a small micro bead of 995 is not going to provide any structural integrity whatsoever. ..it will fall on your floor in 1 piece.
This is not entirely true. You can get a decent attachment on sliders and the stationary with Dow Corning it clear attachment tape. A 1/2” bead will effectively hold the film and glass in.
-
There is another option, there is a product I offer and another member as well. You can send me a private message. Or reach me @ info@filmprolv.com
What setup do you use to cut safety film on site?
in Window Tinting - General Discussion
Posted
Have you ever stacked 3 layers of 15mil on top of each other?