Happy Turkey Day TD members

[Tint Artist]

jumpin' from the womb to the olympics

Dude you have to have some basics of tinting before you can get into some custom stuff! You can't do a back flip on a motorcycle before you learn to ride a bike without training wheels! Get some basic knowledge of how to tint a car first then move into some custom stuff!

[windowtintee]

Here's step by step how to do hand cut tint graphics with color! Step #1.. I'm gonna tape this plotted graphic and tape it to the outside of the window! Step#2..tint the inside with 5%then cut and weed the graphic with your olfa knife by leaving the film in the same place the outline is! Step#3..Coloring.. Take a piece of color film and cover the whole section your coloring in, squeegee, and then cut on the black outline and remove excess film! Make sure the outline is dry before coloring in or you'll cut through the black and see cut marks! The best way to keep graphics clean is to flush with water since you can't squeegee over the graphic or you'll rip the lines off! I take a piece of film and put it over the whole graphic and then squeegee! Final step.. Take silver 20% cover the whole graphic and cut an outline about an a 1/4 inch around the whole graphic evenly! It takes a little practice to have good knife control cutting these, but the more you do the better you get! Happy Turkey Day to all the Tintdude members!!!

Just wanted to give props to Tint Artist, this is impressive work he did a few years ago!

[mikebrook_07]

Wow that is awesome! Looks very time consuming. Way more than 2 hours. This would be a neat trick to learn! Thanks TA