Jump to content

the art of tint

Member
  • Posts

    542
  • Joined

  • Last visited

Posts posted by the art of tint

  1. Yo, thanks for the info, I've been doing the Lexus dealers for years, and you just made my life easier!!!! Getting the quarters up now makes the car a breeze!! I just tintied one today. Thanks Again.

  2. You should heat shrink the film on the outside of the glass, there are only a few fingers. Did you trigger the door pin switch so that the window is in the upright position? You also must leave the doors open for a couple of hours after tinting to dry, so that when the window drops it wont peel. Also be careful of spraying too much water, you can easily burn out the seat switch.

  3. The door pannels dont pop out at the top like the S-class, and you have to be very careful not to get too much water on the switches, If they get too wet the lights come on and the seat stops moving.

  4. with the porsche, you can actually roll up the quarters, but on the lexus, I havent figured out how to get them up with the top down, they are not to bad to tint, with the top up. Good luck

  5. I've had that happen before, Its only on the old body Lexus GS, the brake light is like 15 inches accross, and the cover is as brittle as a potato chip, I just glued it back together and whent the tint is on the glass you cant see the fracture marks. To buy a new one was 400. You dont have to worry about the new body GS, the light pops right out.

×
×
  • Create New...