twotint

On 3/29/2016 at 11:48 AM, Tintor12 said:

Just did a 2015 Durango windshield and now we have no power anywhere except the power seats and fuel door. Vehicle is being towed to the dealer now.

what was the result, I have one in my shop that's dead now. Second time this has happened on a Durango, first one dried out and was fine. This one seems to be the opposite of that scenario 

Yeah looks more like platinum plus unless it's bronze when your looking out. I have some of both films left over

I have CTX on my vehicles and I can tell you it is worth having a nano ceramic. I have a heat light it had an IR bulb but switched it to a halogen bulb for actual heat. The AIR80 will out perform the CTX with the IR bulb. I used to use a hybrid film before ceramic and I thought that was the greatest film until Ceramic came about. I can tell you I have a black interior and I can touch everything and not burn my hand with the film on my truck. I have AIR80 on the windshield, rear doors back glass, CTX on the front doors a day roof. It is well worth the money in my opinion.

The walls are insulated I'm not sure about the door, but I don't think it is. Only trouble is either way I have to knock a hole in the wall and put a window in.

I have a soleus LX140 14000btu roll around and it works ok in the garage. If anything it takes a lot of the humidity out. I put in a drier vent hole in the garage, since they use 5" hose for the intake and exhaust.

Just did one yesterday, easy car once all the panels were removed. The spoiler is in the way on the top, I took it off also. You can just pull the seal out of the bottom, but I wanted to pull the plastic trim out of the way so I pulled the panels. This is defenitly an imported car for Ford, looks like a EURO car the way its put together. I will post pictures later if you want to see them. If you have any questions about the trim panels just let me know.

I have access to Alldata if anyone needs to know just about anything on a vehicle. Just pm me.