jj

Try the soap method, powder is pretty 1999

BTW..

Not sure where the love has gone for TD on this thread?

I couldn't imagine anyone else running TintDude.

Love your work Ric

X2

I did one of these last weekend. The DP gaskets can be removed w/o removing the door panels. The front two panels have a hidden screw on top of the panel near the back. Remove those screws, pry the panel out slightly near the back, pry out the plastic surround slightly near the back of the window, and pull out the gasket. Be carefull pulling on these gaskets though, since they will break easily if side-loaded too much. Just slightly pull up, until unseated from the metal edge of the door, then pull back. All the load must be axial to avoid breaking the molded plastic.

bingo! I use the same technique...

Nice one chop..............

Looks like I'm back in business chums!! After all the problems logging in the thing has been sorted .........Either TD has been busy fixing stuff up or the fact that I moved house over the weekend has rectified the prob. Anyone out there having trouble getting on? Try moving house, its a right pain in the arse but seems to work