Jump to content

Mitsi GTO


Guest DapaaTints

Recommended Posts

Guest DapaaTints

I have got one to do on Friday - what are they like? any assistance would be appreciated. Will I be able to do the rear windscreen in one piece?

Link to comment
Share on other sites

yeah over here they are called a 3000GT, man the car is a pain, take the door panels off, trust me, those rollups throw fingers like a new corvette, the backglass is pretty rough also. I would charge out the ass for this car just to not have to do it :thumb you can pull the plastic trim off around the inside of the backglass, it makes it alittle easier to get to the sides of the backglass.

Link to comment
Share on other sites

Guest tintslut

this car is the very reason to have those stainless gasket wizards in the shop..

I can still remember the first stealth I did,,,,before heat shrinking, those door

glasses were throwin up trees, not fingers. 4 hour car, and still had a small crease

or 2. Finally settled on stickin the film on,, rinsing out the rear edge with straight

water , then tacked it down. Once the edge was set,,, I would pull towards the

edge by the mirror, and hard card. PRE HEAT shrink installs sukked big time .

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

  • Activity Stream

    1. 8

      South facing window tint

    2. 8

      South facing window tint

    3. 1

      Automotive Tint Comparison

    4. 8

      South facing window tint

    5. 8

      South facing window tint

    6. 8

      South facing window tint

    7. 1

      Automotive Tint Comparison

    8. 8

      South facing window tint

    9. 8

      South facing window tint

    10. 0

      Sun Pro Glass Tinting is NOW HIRING experienced Installers

×
×
  • Create New...