Jump to content

2006 chrysler 300c srt8

Guest tintgod

Recommended Posts

Guest tintgod

did one of these today also...really really nice car..and fast as hell..not that I would know :dunno

seals come out easy on the doors... :beach

back glass...The third brake like should be taken out...really tight behind it..couldnt even get my bull dozer behind it

so..that means you have to take the back deck out...

fold back seats down..one single pop in the center of back deck

you have to take the side cushions off the back seat to get the deck out...10 mm bolt half way down on a bracket coming off it...easy to find...now the tricky part...to get the cushion out..pull back on the top of the cushion..and there will be something holding the cushion in place...it is a metal clip..you HAVE to take a large flat head screw drive and push down on the top part of the clip to release it ..to take the cushion out..then...you can slide the back deck out...and take out the 3rd brake light

the brake light is kinda a pain to get out ..but it will come out...two bolts holding it in...getting it back in a tricky without focking up the film....be carefull

then just slap it back together in reverse order and your good to go.. :)

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  •   Sponsored by






    ride wrap


  • Activity Stream

    1. 0


    2. 0

      Sub contractors needed East Tx 27k security film and caulking

    3. 0

      Austin, TX - Experienced Window Tinters - Full Time- $1000 Signing Bonus - W2 - Year Round Work - Willing to Relocate

    4. 0

      Total OffRoad & More is now hiring for our Nationwide Stores.

    5. 9

      Low angle haze

    6. 9

      Low angle haze

    7. 9

      Low angle haze

    8. 1

      Best place to learn window tint ppf

    9. 9

      Low angle haze

  • Create New...