Flat glass and Auto glass installer needed
-
Sponsored by
.png)
-
Activity Stream
-
0
HIRING WINDOW TINTERS PPF WRAP TECHS
. Window tinters, car wrappers ppf installers competitive pay vacation pay With bonuses. Flexible hours commercial and residential projects available. 2 locations in Southern California since 1993. Pasadena california glendora california. Minimum one year experience. Visit our websites.Check out our social media posts. Vipcenters.com Moderntouchfilms.com Contact me Robert 626 255 4987 text please thank you. -
2
At What VLT% does visibility start being impacted
2024 Toyota RAV4 GX Auto 2WD My region is humid subtropical climate (Köppen climate classification: Cfa/Cwa) somewhat similar to Dallas-Fort Worth Texas.- Visibility
- VLT%
- (and 5 more)
-
2
At What VLT% does visibility start being impacted
The answer is YES.... Any tint will impact your vision. How much you can tolerate is really subjective and situational. Are and vision impact, where you are driving impacts, the type of car and window angles impact......- Visibility
- VLT%
- (and 5 more)
-
6
Automotive Tint Comparison
It's probably worthwhile mentioning that I live in a climate similar to Dallas-Fort Worth Texas region (in particular around Denton/Sherman); Lawton, Oklahoma or Puebla de Zaragoza in Mexico -
6
Automotive Tint Comparison
I forgot to ask about Low Angle Haze (LAH), do any particular films have less LAH than others? Is LAH so much of a problem that it's better to avoid ceramic tint and go another kind of tint like SunTek CXP (CarbonXP) CXP -
2
At What VLT% does visibility start being impacted
In the jurisdiction in which I live, we are allowed to have 35% in front and 20% in rear. I'm wondering @ what VLT% does the driver's visibility in adverse conditions like night time driving, storms, cloudy weather, fog, floods, etc., start being impacted? Front side windows: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% Rear Side Windows: 38.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00% Rear Window: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00%- Visibility
- VLT%
- (and 5 more)
-
6
Automotive Tint Comparison
If the only tinter providing MEP Films is a mobile tinter that uses more water than normal and I don't have a garage to tint in then would you avoid the tinter and opt for a tinter with a workshop that uses either: SunTek CIR (CeramicIR) CIR SunTek CXP (CarbonXP) CXP SunTek Evolve Solargard VTX Pro Premium Ceramic (by the way, does anyone know where the Technical Spec sheet is, I tried finding to no avail) XPEL Prime XR Black Johnson Window Films InsulatIR IR GLOBAL WINDOW FILMS QDP CERAMIC FILMS Global OZ Window Films CBXtreme Ceramic -
4
Why is my film sliding around in GCC Jag V Plotter?
Your film might be sliding around in your GCC Jaguar V plotter due to several reasons. Firstly, ensure that the film is loaded correctly and securely in the plotter's rollers. Check for any debris or dirt on the rollers that could cause slippage. Additionally, ensure that the plotter's settings, such as speed and pressure, are appropriate for the type of film you're using. Using a tackier or adhesive-backed film can also help prevent sliding. Lastly, make sure the plotter's firmware and software are up to date to avoid any compatibility issues that could lead to film slipping during plotting. -
5
Cracked glass
I was thinking it would be higher on the absorption.... Great info on the whole post though Tintguy -
6
Automotive Tint Comparison
MEP Films distribute Llumar in Australia. I for one have been using Llumar since 1984 and have very rarely had or seen any issues with quality and that is why the brand is my go-to the majority of the time. Sun Tek have some good automotive films that I like, but other than those, I am strictly a Llumar user. BTW Eastman Chemical own both Llumar and SunTek so I imagine their film technology may be somewhat shared.
-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.