Jump to content

lexus IS 300?


eastcoastfloyd

Recommended Posts

Guest tint51
I did one yesterday and after 3 tries I almost had it perfect, but too much heat so there was one line near one of the defroster line and the customer is coming back for a fourth run.So my question is the sand paper did not scratch the glass at all?
I used 1000 grit sandpaper and did a wetsand on the back window and it turned out perfectly, no threads of the steel wool on the back window

I also am redoing one of these For the same reason so how is 00 Grade Steel wool on lines?

Link to comment
Share on other sites

Guest tint51

So I am redoing a IS300 tomorrow because of Defrost lines...and dirty.

So Got some 0000 steel wool to use..

1) Strip it and steel wool lines an

2) Press hard with the blue max to get it to lay down?

Or any other pointers..

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

  • Activity Stream

    1. 0

      Residential Film without blue hue?

    2. 8

      South facing window tint

    3. 8

      South facing window tint

    4. 1

      Automotive Tint Comparison

    5. 8

      South facing window tint

    6. 8

      South facing window tint

    7. 8

      South facing window tint

    8. 1

      Automotive Tint Comparison

    9. 8

      South facing window tint

    10. 8

      South facing window tint

×
×
  • Create New...