Grand Cherokee door card/panel removal

[jpwindowfilms]

Hi.

I have got a new-ish Jeep Grand Cherokee in for a tint today and have not done one before.

Does anyonoe know how to remove the rear door card/panel?

Dont want to miss a screw and snap something.

Many thanks, Jon.

[tint_detective]

One screw behind the door exit handle, the other is in the grab handle.

IF there is another one or two, which I don't think there is.

It will be at the bottom, the very bottom.

Then it just pops off, it has push clips all around, it may take a little effort, but once they start to pop the rest will follow..

Good luck!!

[Guest sunscreen]

why take the door panel off?

[Guest haroldshouseoftint]

why take the door panel off?

you don't need to, just pull the rubber out no need to go through all the headache

[jpwindowfilms]

Brillian. Thanks for everyones help.

Will try just pulling the rubber trim out. Irf that dont work will pull the panel.

Thanks again.

[Guest VOLTRON]

or just tuck the film behind the rubber, but pulling the gasket might make it easier for ya

[jpwindowfilms]

Thanks guys.

All went well.

This is how it truned out.

[Guest tintman AZ]

Glad we could help!

[mustangdroptop96]

I have never seen one of those without factory tint on the back windows, those are simple to do. Unless those seals are packed with dirt, usually you can tuck behind them pretty easy. looks like you did pretty good!