Jump to content

NEED HELP!! TINTING THE 07 CONT, GT COUPE


Guest DAVETHETINTMAN

Recommended Posts

Guest DAVETHETINTMAN

HELLO everybody, I own ELITE Glass Tinting in pa , unfortunatly for this the area we don't see these cars that often. this will be the first for my store ever.. I have been reading all the do's and dont's for this car , but can't find any usefull tricks how to tech on the quarter glass.. trim panel removal ect..

I am however very aware of all the cars electronic's and such , but would really like to get some info on to properly do the quarter glass as I would like to tint from edge to edge ..

so basicaly like to know what others are doing with these cars ..

thanks for any help :thumb

Link to comment
Share on other sites

I've done a few of theese for footballers and the likes, toughies. it's only the 1/4s that are tuff. I tape as much of the inner trim back as I can, start fitting with the glass up, the hard bit is getting the back edge in. once its on, I leave a very small gap at the top edge, don't like gaps but you can't do the impossible. a little bit of patience will go a long way on this one. good luck.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...