Jump to content

CL 600


Guest Mo Evo

Recommended Posts

I did a new CL 600 Renntech edition. Beautiful black car, but whoa, those side quarter roll ups are a biatch to tint. The rear window was cake, as were the fronts. The quarters took me the majority of the time because, even though I have long tools, you just can't physically reach to the point at the rear of the glass. I did flip the lock mechanism on the front doors to trick it into thinking the doors were closed and therefore the windows sealed up, but still. I also taped around the edges because of the felt and fortunately, they came out ok with just a little dirt at the far reaches. I didn't want to use too much water either. Anyone have any secrets to doing these.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  •   Sponsored by
    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

  • Activity Stream

    1. 2

      Automotive Tint Comparison

    2. 0

      Residential Film without blue hue?

    3. 8

      South facing window tint

    4. 8

      South facing window tint

    5. 2

      Automotive Tint Comparison

    6. 8

      South facing window tint

    7. 8

      South facing window tint

    8. 8

      South facing window tint

    9. 2

      Automotive Tint Comparison

    10. 8

      South facing window tint

×
×
  • Create New...