AUDI RS4 CAB

[Guest Hashy]

Hi,

Just wanting to know if the rear screen on a rs4 cab has got a dot matrix to tuck the edges of the film into?

Hashy

[Guest shadowline]

I would think the rear screen is the same as the normal A4 cab, and as my otherhalf has one, no there is no matrix on the sides. HTH

[Guest Hashy]

when the film is taken into the car is there an edge to tuck the film into? I dont really want to dead edge it

[Guest shadowline]

No, I wouldnt try to tuck the film into the edges, as there fabric from the hood, and of course are quite firm so you cant tuck under anything. When I tinted her one I cut the pattern on the outside, then installed, there is not a visable gap unless you are "mm" away from the screen on the inside

[Guest Hashy]

thanks for the advise mate, ill see what happens tomorrow

[Guest shadowline]

No worries, take a picture, the RS4 cab is a wicked car!!

[Guest Hashy]

Heres a PIC

[Guest shadowline]

Sweet car, whats the film?

[Guest Hashy]

Suntek HP20 on the rear and HP35 on the front

[Guest shadowline]

No, I wouldnt try to tuck the film into the edges, as there fabric from the hood, and of course are quite firm so you cant tuck under anything. When I tinted her one I cut the pattern on the outside, then installed, there is not a visable gap unless you are "mm" away from the screen on the inside

Yep the 35 is a good film, carbon 35 its all round my my girls A4 cab, I know it shouldnt be there and I wont do it on a customers car but we know what we like, and its what she wanted on her car!