Mr. Micro Edge Posted June 25, 2013 Report Share Posted June 25, 2013 Talk about cake walk!!!! Back glass was a breeze and for all you panel pullers a torx screw behind the door handle and two in the bottom of the pull handle...so a total of three in each door and the panels pop right off. Pull out the sweeps and BAM....smack some tint and your done....I could tell a difference in cutting the roll up top edge...notes the side windows are laminated as well perhaps this is why. Overall could do these everyday . Bothe the silver and black one tuned out flawless. Link to comment Share on other sites More sharing options...
TintDude Posted June 25, 2013 Report Share Posted June 25, 2013 Nice Link to comment Share on other sites More sharing options...
Shadebyblade Posted July 11, 2013 Report Share Posted July 11, 2013 Thanks good to know. I just tape the bottom and side. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.