oahudrew
-
Posts
18 -
Joined
-
Last visited
Reputation Activity
-
oahudrew got a reaction from Roach in Frost across doors
Here are a few examples of office privacy film installation. We mark the opposite side with a dry erase marker and put a level line on it. Pulled the strips on a film handler. The bottom right install was the easiest because I used 36" film. If you can't remove the handles you only need to split the film right at the handle and seam it.
-
oahudrew got a reaction from wade_660 in Frost across doors
Here are a few examples of office privacy film installation. We mark the opposite side with a dry erase marker and put a level line on it. Pulled the strips on a film handler. The bottom right install was the easiest because I used 36" film. If you can't remove the handles you only need to split the film right at the handle and seam it.
-
oahudrew got a reaction from Tint speed in Moving to Sarasota Florida(need advice)
Google tinters in Sarasota so you can position yourself in a good location. Lots more people in Tampa or St. Petersburg.
-
oahudrew got a reaction from Roach in Flat glass film removal
If the outer layer will peel off you can wet it down with heavy soap solution and use that or put a leftover liner over it to kept it wet. When you see it starting to look milky the adhesive is starting to loosen and you can use a floor scraper from home depot on it. Triumph makes a heavy duty scraper also. Be very carful not to jam one of these in to the frame because it could chip the glass.