corvette one piece

[Guest areyouthetintguy?]

I have 93 corvette to do in the morning,,its been a long time since I have done one of these...back in the old multi piece rear window days,,,whats yur opinionon doing the rear hatch on these..I am asking you because know u are the expert with the vettes,,thanks

[Guest areyouthetintguy?]

anyone?

[Guest tintslut]

havent done one in 6 weeks, IM a little rusty.

[Mr paladin]

Do the back window seemless in 3 pieces,do the middle in one big piece,and then seem it along the last defroster line on each side

[Mr paladin]

It can be done in 1 piece but it is a biatch,you need to remove the shocks holding up the glass to do it in one piece.

[Guest tintgod]

those are cake...dont worry about it..the top has a little shrinking to do but not bad...and the bottom isnt that bad either...just take your time..good luck..

[Mr paladin]

I also preferr to turn the tint sideways on the middle piece and shrink it on the sides instead of the top and bottem.(good luck)

[Guest areyouthetintguy?]

ok,,thanks for the replies,..I just needed a little confidence boost on this one,,,its been almost 5 years since I have done one of these....also have an 86 camaro coming in next week,,,those are a blast from the past around here,,probably about 6 or 7 years since doing one of the old school camaros

[Guest Blade]

havent done one in 6 weeks, IM a little rusty.

Cake job

[tintguy]

I do it exactly like paladin.

remove one shock at a time. Put channel locks on the one that you've left on the glass. Makes life a little easier