Guest jennifer Posted November 7, 2005 Report Share Posted November 7, 2005 I own a tint shop and have been tinting for a little over three years. Next week I have a 2006 Corvette to do and I am unsure of how I will shrink the back window in one piece. I use Madico, Black Onyx film ad would greatly appreciate any tips on these cars. Please Help!!! Link to comment Share on other sites More sharing options...
Guest metint Posted November 7, 2005 Report Share Posted November 7, 2005 I own a tint shop and have been tinting for a little over three years. Next week I have a 2006 Corvette to do and I am unsure of how I will shrink the back window in one piece. I use Madico, Black Onyx film ad would greatly appreciate any tips on these cars.Please Help!!! [*]334823 Well... the 06 is the same glass as the 05 and I saw a couple of seasoned tinters get whipped trying that glass at the LLu booth/SEMA... that was with ATR 35... Mad Onx... may I suggest 2 piece... Link to comment Share on other sites More sharing options...
BIG E Posted November 7, 2005 Report Share Posted November 7, 2005 Link to comment Share on other sites More sharing options...
Guest unsivilized Posted November 7, 2005 Report Share Posted November 7, 2005 ive seen them done in 3-10 pieces lol, never done one...wont do one Good luck Link to comment Share on other sites More sharing options...
Guest losdawg Posted November 7, 2005 Report Share Posted November 7, 2005 did an 05 using suntek hp, used the M-dizzle method and it turen out great! Link to comment Share on other sites More sharing options...
the art of tint Posted November 7, 2005 Report Share Posted November 7, 2005 I own a tint shop and have been tinting for a little over three years. Next week I have a 2006 Corvette to do and I am unsure of how I will shrink the back window in one piece. I use Madico, Black Onyx film ad would greatly appreciate any tips on these cars.Please Help!!! [*]334823 Its not easy at all, you may need a few more years experience to get it in one! It takes me about a half hour just to shrink. One of my competetors here has been tinting for about 5 years, and he couldnt get it in one. Good Luck! Link to comment Share on other sites More sharing options...
Guest zolar Posted November 7, 2005 Report Share Posted November 7, 2005 Paitience with that one....take it slow, and not too much heat it will go in one piece good luck Link to comment Share on other sites More sharing options...
Guest tintgod Posted November 7, 2005 Report Share Posted November 7, 2005 I have done one 05' dont know if the glass is the same...but I didnt have any problem with it...wene I did it I was still using drier sheets...it just take a good tinter I guess.. Link to comment Share on other sites More sharing options...
Guest tint rookie Posted November 7, 2005 Report Share Posted November 7, 2005 since were all tooting our own horns here. I do em wet still. I do cheat, and mark which direction the factory edges are truely facing with a china marker, after the film is laid down on the glass. if you have min exp. on em take your time. I can do one in 30 min. just cruisin. 16 min double gunnin it (just to show off to a rep as to why I didnt use his film). dont be afraid to let some areas cool down while you work others, comes out a lil more even. Link to comment Share on other sites More sharing options...
TINTDESIGNZ Posted November 7, 2005 Report Share Posted November 7, 2005 My competitor did the sides on this car and gave up on the back glass-so I Helped him out for a small fee!The same amount he charged for the whole car! Used lulu atr15 and shrank it with soap- took 30 minutes start to finish. It really seemed like an easy glass! ss Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.