Tinting a Lancer

[TintDude]

Before you lay the film onto the window, let the soap haze dry completely, it's there to keep the film from sticking to the glass until it's smoothed down.

Cut the film about an inch oversize, do not do your final cut until the film is all shrunk.

[Guest Ernesto]

ahh now that I saw the second link I under stand. I leave about 2-3" of extra film but not too close to the rubber so the heat gun won't get the rubber. After the film is nice and smooth then I cut to the point where I want it, correct?

[TintDude]

[Guest Ernesto]

Before you lay the film onto the window, let the soap haze dry completely, it's there to keep the film from sticking to the glass until it's smoothed down.

Cut the film about an inch oversize, do not do your final cut until the film is all shrunk.

[*]397378

OK I get it, seems pretty simple. Thanks for the help man, really appreciate it.

Got any more tips

[TintDude]

OK I get it, seems pretty simple. Thanks for the help man, really appreciate it.

Got any more tips 

[*]397381

Don't eat yellow snow.

[TINT]

Before you lay the film onto the window, let the soap haze dry completely, it's there to keep the film from sticking to the glass until it's smoothed down.

Cut the film about an inch oversize, do not do your final cut until the film is all shrunk.

[*]397378

OK I get it, seems pretty simple. Thanks for the help man, really appreciate it.

Got any more tips

[*]397381

I would suggest finding another career mang

im kidding. your getting lots of valuable advice here.

[Guest Ernesto]

Thanks for every thing guys...im off to bed

[Guest zolar]

OK I get it, seems pretty simple. Thanks for the help man, really appreciate it.

Got any more tips 

[*]397381

Don't eat yellow snow.

[*]397383