Qwestion for solar zone (hanita) users

[pitchatint]

Anyone having a prob with wrinkles in the film strate off the roll ?

Kinda like the liner is shrinking and pulling wrinkles in the film that stay put after the film is installed

automatic fingers even on a flat window it will shrink out but what a hassle

somtimes it will be the whole roll and somtimes it wont start untill after 50 feet or so

my sorce for the film tells me im the only one bitchin

anyone had to deal with this ?

[Guest haroldshouseoftint]

I don't use hanita, but I do know what you are talking about, it is like it wasn't rolled up tight at first then got tight on the roll, sucks, but is fixable once installed.

[pitchatint]

I don't use hanita, but I do know what you are talking about, it is like it wasn't rolled up tight at first then got tight on the roll, sucks, but is fixable once installed.

This has been going on for months thinking about changing films would save me a bunch of time if I didnt

have to deal with this

[Guest vclimber]

I've had it happen on Madico and Lllumar but it was usually on the the very begining or end of a roll and it was a very rare occasion when it happened.

[blade]

no problems with the hanita I've used. which isn't much but still... the rolls I have are fine. good lookin' film too.

[Guest willie]

I don't use hanita, but I do know what you are talking about, it is like it wasn't rolled up tight at first then got tight on the roll, sucks, but is fixable once installed.

but what do you know

[Guest haroldshouseoftint]

but what do you know

wow someone finally caught that,

good one Willie

[Guest willie]

but what do you know

wow someone finally caught that,

good one Willie

way better than the soup bullchiatt

[Guest CajunTinter]

I've had that once w/ Lulu, but it was years back.. I don't use hanita, but I know where you are coming from ....

[Guest vclimber]

I remember when I was starting out I got a roll of silver 20 that had that and I thought I could just put it up and squeege really hard to smooth it out.

Bad idea!