Question on rivets

[Guest tat2punk]

I am doing a wrap on the box of a moving truck next week. I have done many of the standard rivets on these box trucks but this one is different. It has few rivets but they are the ones that are about an inch in diameter and look to be a hard rubber/plastic. Is there anything you do different on these to prepare them? I am worried about the material sticking to them after awhile.

[Guest All Wrapped]

Visit My Website

If you heat shrink them right you will have no problem.

Or you can allways use 3m primer 94 on the rivits

[Guest Randy]

Check with Dustin Owens of GForce Products in Greensboro, NC. Met him at Feller's Boot camp this past weekend. He's got the "Rollepro!" In Feller's catalogue. Frickin' awesome - rivets will lay down on the material and look like they were painted on! 336 289 5012