Jump to content

solarzone or suntek

tint_audiopros

Recommended Posts

Guest darkdan

Guest darkdan

Posted
Posted
yeah the couple times I have ordered from hanita, service was not that great & often no one answers the phone. :)

When I first starting ordering from them it took about 2 weeks to get a hold of them. I'm not sure if they were all out of the office or what.

Since then the only problem I've had is twice they somehow lost my order and I had to call and ask where it was. Luckily though, I ordered far enough ahead of time of those jobs that it still got here with plenty of time. So I won't hold it against them.

My Madico distributor (MWM) is great though.

Link to comment
Share on other sites
  • Replies 35
  • Created
  • Last Reply
Guest vclimber

Guest vclimber

Posted
Posted
I think the only area they do a nice job is in the Bay area because Mark takes care of his custys from his storage shack

:lol2 Storage shack... Scott is a great guy with a tremendous background in the industry.

My Madico distributor (MWM) is great though.

I don't trust JH. :)

Link to comment
Share on other sites
tint_audiopros

tint_audiopros

Posted
  • Author
Posted
yeah the couple times I have ordered from hanita, service was not that great & often no one answers the phone. :)

When I first starting ordering from them it took about 2 weeks to get a hold of them. I'm not sure if they were all out of the office or what.

Since then the only problem I've had is twice they somehow lost my order and I had to call and ask where it was. Luckily though, I ordered far enough ahead of time of those jobs that it still got here with plenty of time. So I won't hold it against them.

My Madico distributor (MWM) is great though.

it seems to many distributors out there now days have no idea about the film their trying to sell. I found myself telling the gentleman at mwm what type of adhesive his films had :lol2

Link to comment
Share on other sites
TINT

TINT

Posted
Posted
I think the only area they do a nice job is in the Bay area because Mark takes care of his custys from his storage shack

:)

when I order I call hanita directly at theyr'e texas office. they did take forever to make new sample booklets, and I told mark about using "spec cards" with the sample of film, I told him about it last year and now they have it. :lol2

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    rewiredtech.io

    tinttek

  • Activity Stream

    1. 0

      flat glass commercial and residential installer needed New York / New jersey area

      Looking for a flat glass installer with experience NY / NJ area call 212 401-1228
      sdima2424 in Classifieds • Employment • Marketplace
    2. 0

      Reimbursement for warranty work on solar or safety film

      Just out of curiosity - how much do different manufacturers pay for labor for warranty work on solar and safety films? Thanks!
      yesfan2 in Window Tinting - General Discussion
    3. 2

      Marks appearing on the window after tint removal

      I would go at it with a few chemicals to see what might work and definitely have some steel wool like @Tintguy1980 mentioned. Wouldn't hurt to tape off the edge of the frame and use some plastic sheeting to keep the chems off the paint and rince everything after. Chems I might try: 1. 3m adhesive remover in the red can (not aerosol) 2. Spot Shot 3. Rapid Remover Or maybe just a tablespoon of soap in a bottle of water and a scraper blade. Alcohol won't always do it depending on what the adhesive is polar towards, and can sometimes seem to harden it. If you are BLADING THE GLASS, make a conscious effort to ALWAYS HAVE ONE ARM BEHIND YOUR BACK. Failure to do so can send you to the hospital quickly...this was a tough lesson that I and many others learned the hard way!!!
      Dano in Window Tinting - General Discussion
    4. 0

      We are hiring experienced individuals LAS VEGAS NV

      Looking to hire a few window tinters and wrappers for the following locations: Palmdale, CA And Las Vegas, NV Fulltime or Part time. Compensation will be discussed in person.702-909-0202
      fivestartint in Classifieds • Employment • Marketplace
    5. 0

      Experienced Tinter- Inland Empire- 1,500-2,000 salary based on experience

      Looking for a tinter with experience in the trade, willing to pay $1,500-$2,000 salary based on experience. We are a high-volume shop working with updated equipment and highest quality materials, you will be working alongside an experienced tinter to complete each vehicle All film is cut by plotter Monday - Friday 8:00am - 5:00pm Saturday 8:00am - 3:00pm You must bring your own tools and are required to show up on time and complete work in a timely manner Please call and ask for Ronnie 619-339-2211
      Temecula Tint Center in Classifieds • Employment • Marketplace
    6. 8

      Streaks after window tint

      I hope he didn't; makes for excellent business goodwill and PR.
      Tintguy1980 in Window Tinting - General Discussion
    7. 2

      Marks appearing on the window after tint removal

      Sounds like you just experienced dry adhesive, which chemically forms a bond between glass and adhesive. It is the most successful adhesive for long term visual quality and bond strength (longevity). It IS a real bear to remove at any point after it chemically cures to the glass (usually within 30 days). Lots of blades and elbow grease for sure. My method was to scrape a strip and yank, scrape a strip and yank ... again and again until time to remove the residual adhesive. There are not many 'safe' chemicals that can be used to 'easily' remove it. I do know that a dry adhesive will come away from the surface of glass a little easier when the surface temp is below 40 F. Who has that kind of opportunity other than those in Canada/Alaska type environments. Sad. You can try using 000 or 0000 steel wool in an attempt to remove those marks. Outside of this I cannot remember any others ideas for tackling that.
      Tintguy1980 in Window Tinting - General Discussion
    8. 8

      Streaks after window tint

      Yeah, dual-pane glazing units can fail at any point in time from day 1 and up. It's rare in the first couple of seasonal cycles, but you never know until it shows itself. Dual and Triple pane systems rely on the seal between glass and spacer. Even there they can have a single seal; glass to spacer, or a double seal that wraps the outer edges and seals (encapsulates) spacer and glass as well. The latter is found in high quality glazing systems. The former brings trouble before its time. The gas or dead air space between the panes has zero to little impact of failure of seals. Once a seal is compromised (for whatever reason), moisture intrusion occurs. It can be visible to the eye when cool and it can be microscopically invisible. What produces the visible lines, smudges, spots, etc. is the desiccant (located in the spacer to absorb any minute moisture). Kind of like the dry packets used in shipping goods. Desiccant gets wet, heats up to vapor from sun exposure, it deposits on the interior of the system and once the sun dries it, you get a number of different aforementioned looks; some obvious, some not so much until film is applied. You can have the one sash replaced, either through warranty based on seal failure or by out of pocket cost. Be sure you let the window folks know the other panes do not display the same as the one in question. They have a tendency to baselessly blame seal failure on applied window film, which our industry has dispelled through long term studies using the 'right' window film for the system. Good luck
      Tintguy1980 in Window Tinting - General Discussion
    9. 2

      Marks appearing on the window after tint removal

      Hey guys, Hope all is well by your side! Quick question: I went on site to remove a tint that were installed approx 2 years ago. External window film, don't know the brand of that film. Once I came on site and tried to remove the film with pure alcohol and cleaning blades, I struggled a LOT. It took hours for me to remove the adhesive. After the film has been removed, I spotted on the window some kind of weird marks that appeared as you can see on the attached pictures (only a few marks here and there on the glazing). I tried to remove those marks from the glazing without any success... Did someone experienced the same issue and has potential solution to remove those marks? Would it be the film responsible for such issue or, did I miss something during the removal process of the film ? Any piece of advice would be appreciated. Thanks in advance for your support!
      Nardo54 in Window Tinting - General Discussion
    10. 2

      Xpel; rookie (me) popped air pocket and nicked paint

      Thanks, I appreciate the reply. Thinking that between the fact the cut is really small, the film probably recovered over the top, and a tiny bit of paint to seal the margins it should survive our salt seasons. Sound logical? Part of me wants to have the hood redone just to train myself to be more careful, but this is such a small defect and so hard to see I'm leaning towards the very small dab of paint approach.
      JonMN in Paint Protection Film, Clear Bra Forum
×
×
  • Create New...