2011 infiniti m37

[Guest dumplin]

I just did 2 of these last Sat. all door panels are super to pull . Remove little plastic cap behind door open handle , think as in a Maxima or Altima, 10 mm . Down near armrest area there is a pull pocket , I used a small , bent straight edge screwdriver placed in the very center .Cover pops outs slightly and then slides out at an angle , 2 phillips screws there . Back glass had the motorized cover built in to the deck , was somewhat tight , but managed okay . Sadly couldn't get away from rear brakelight , too much work to remove the whole rear interior. Customer didn't want me to remove , 2nd. vehicle back deck had more room and film slid easy to cover the light . Used a whale tail and it came out butta , defrosters aren't thick on these cars . good luclk all