Jump to content

Glue For Matrix

uncle bob

Recommended Posts

  • Replies 25
  • Created
  • Last Reply
uncle bob

uncle bob

Posted
  • Author
Posted

Can anyone advise what make, type glue they use on awkward matrix's.

Have done a few 3 series coupes recently and they have been a total pain, looking to try the glue method but need to know what UK guys use and if possible where from please

Cheers

Bob

I use black vinyl over the dots and then butt the film to join it.

Do you have some sort of template? do you cut this by hand or in a plotter? do you apply wet or dry?I take it you fit the vinyl first and then the film?

I can see the film install being a bit easier with less film to get into the rear.

Matty

Thanks for the glue info.

Thanks for the replies guys.

If gluing I assume I install as normal, squeegee, then drop the film that covers the matrix dots, apply the glue (all over dots or along the bottom half) and then hard card towards the top :blink

Thanks again

Link to comment
Share on other sites
Guest Tint Technology

Guest Tint Technology

Posted
Posted

Hav'nt use glue in years just heat it in, no customers back yet an just done new one about two weeks ago for the usual BM customer.

:thumb X2 The problem with glue is it's not UV stable, ends up going yellow :nono Explain to the customer about dot matrix, never had a problem :dunno

Link to comment
Share on other sites
tintmor

tintmor

Posted
Posted

Hav'nt use glue in years just heat it in, no customers back yet an just done new one about two weeks ago for the usual BM customer.

:thumb X2 The problem with glue is it's not UV stable, ends up going yellow :nono Explain to the customer about dot matrix, never had a problem :dunno

Is right :beer

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

    ride wrap

    Lexen

    Tint My Ride

    tintwiz

  • Activity Stream

    1. 0

      Flat Glass Installer NEEDED

      Full time Flat Glass installer needed in Lady Lake FL. 3M film, residential and commercial. Mostly solar but some security. This shop has been under the same ownership and in the same location for 34 years. We are the oldest 3M dealer in the tri-county area. Chris Gehman Owner Underglass Auto Tech Inc 334 S. Highway 27/441 Lady Lake, FL 32159 352-753-5267 352-753-8886 fax chrisunderglass@comcast.net
      Underglass in Classifieds • Employment • Marketplace
    2. 0

      Now hiring experienced window tinter

      Car Tunes Brandon is hiring to its growing team for full time position window tinter 8-6 Tues thru Saturday. Call Shannan or Jason with Car Tunes 813-661-4052 112 N. Parsons Ave Brandon,Fl 33510
      CARTUNESONLINE in Window Tinting - General Discussion
    3. 0

      Any XPEL Dealers?

      Are there any XPEL dealers lurking that can answer a question? You can DM me if you prefer.
      DynamicATL in Window Tinting - General Discussion
    4. 13

      Where can I order Window film online?

      You can try Alibaba，and get some samples first.As I know,1 roll is about $100. Whats app:+86 18028875794; email: glassfilm@kashibang.com
      Icey in Window Tinting - General Discussion
    5. 1

      TintX Puremax and Koolmax

      I’ve tried both pure max carbon and koolmax ceramic. So from what I’ve experienced the pure max is honestly very easy to work with and just feels right as the beginner I am. I’ve easily shrunken rear and front windshields as a beginner with the pure max so I know someonewith experience can easily work with it. However I’m not sure if just me but the koolmax ceramic has just been a headache thing to shrink on rear windows only. Heard the adhesive isn’t as good either especially by dot matrix’s which I encountered on a 2000 mustang. But yea I recommend the pure max line although I switched over to geoshield .
      Offwhitetintz in Window Tinting - General Discussion
    6. 7

      Question about VLT variance

      Pulling information from some website.... what you posted is only part of the whole thing.
      Ryker in Tint Laws
    7. 4,171

      What did you tint today?

      LLUMAR AIR80 +xpel xr black 05
      exhume in Window Tinting - General Discussion
    8. 4,171

      What did you tint today?

      Li Auto L7 llumar air80+IRX15
      exhume in Window Tinting - General Discussion
    9. 7

      Cracked glass

      The above post is a bit controversial and naive in nature. May I suggest improving technical knowledge by using a film-to-glass chart, IWFA's study on window film use on dual pane glazing systems, and glass itself. Air/gas used in dual and triple pane glazing systems has zero impact on what gets installed. Absorption rate of film and glass edge quality impact the aforementioned glazing systems most. The film used in the OP has absolutely no reason to be installed to the exterior surface. Neither do the vast majority of film products that carry an absorption rate less than 50%. Start searching for good quality information to better serve you and your clients. And finally, installing on the exterior maybe has a life expectancy of 5-7 years before seeing degradation. Properly installing a product deigned for the interior (on the inside) increases life expectancy up 20-25 years, depending on the quality of the film.
      Tintguy1980 in Window Tinting - General Discussion
    10. 7

      Question about VLT variance

      I just did a minor search on google and found this about the tinting laws of Illinois State. Windshield: Non-reflective tint is allowed on the top 6 inches of the windshield. Front Side windows: Must allow more than 35% of light in. Back Side windows: Must allow more than 35% of light in. Rear Window: Must allow more than 35% of light in. Please keep in mind that it is only for Sedans, if you have SUV then the law is different.
      eddiesagers in Tint Laws
×
×
  • Create New...