Which Bronze film am I looking for

[Blktint]

Just left a job estimate at a sushi restaurant. 300sqf of glass and the Owners want a Bronze gold or copper color film as dark as possible. They mentioned 5% but I think the lowest out there is 15-25%.  They said another company showed them a film that was gold on exterior side and regular black looking out. 

So can anybody guide me to a manufacture that will sell me a gold or bronze film that may be black on the interior side, darker the better. ?

[Ocala]

Llumar makes a R15 bronze/grey

[jh812]

Reflective silver 15 from ewf.

[jh812]

And of course it's sideways.

[jh812]

They also have a gold.

[Blktint]

I checked out the Ewf  but they are not dark enough. The only thing I dont like about the Gold is the super reflective silver on the interior side. I may have to just try to convinced them to go with a DR film rather than bronze. 

[jh812]

Even the Dr 15 and below is gonna look black from ewf. The other two would be colored looking out and silver looking in. Let us know what you wind up with.

[Blktint]

I'll let them decide. I did DR 5% from EWF earlier this year on a smaller restaurant. If they would chose this rather than the bronze/copper I would be happy guy. And they get what they want minus the exterior color.  It looks like normal smoke tint looking out which is what these customers want. 

[Blktint]

OF COARSE ITS SIDEWAYS 

[jh812]

Haha. I've installed that as well. Good luck finding something. Sometimes you just think really that's what you want?