GlassWithClass

Get yourself some Mothers scratch remover, put a bit on you scrub pad and scrub the $#!+ out of the windows. I do it dry first then add a bit of water and finish it off. Clean window and WOW no more sticky window! Did this on the Range Rover sport and worked like a charm! Thought I would share with you all. Happy tinting!

Get yourself some Mothers scratch remover, put a bit on you scrub pad and scrub the $#!+ out of the windows. I do it dry first then add a bit of water and finish it off. Clean window and WOW no more sticky window! Did this on the Range Rover sport and worked like a charm! Thought I would share with you all. Happy tinting!

New hybrid. Front doors are a breeze one screw under rubber in arm rest, pops right off. Back doors same deal to get the panel off. However the sweep is attached to a privacy screen, you need to remove the screen. Its attached to the quarter window screen also. Pop the front cover off the quarter window screen its three red clips. There are two silver screws behind that you need to remove. Once the panel is pulled there are four more silver screws along the bottom of the screen that need to be removed, then the whole thing comes off as one unit. After that its just another Acura. BG is flat, has a moulded third brake light, buy easy to get your dozzer or whatever you use behind it. Did this one in 20%.
 

New hybrid. Front doors are a breeze one screw under rubber in arm rest, pops right off. Back doors same deal to get the panel off. However the sweep is attached to a privacy screen, you need to remove the screen. Its attached to the quarter window screen also. Pop the front cover off the quarter window screen its three red clips. There are two silver screws behind that you need to remove. Once the panel is pulled there are four more silver screws along the bottom of the screen that need to be removed, then the whole thing comes off as one unit. After that its just another Acura. BG is flat, has a moulded third brake light, buy easy to get your dozzer or whatever you use behind it. Did this one in 20%.
 

New hybrid. Front doors are a breeze one screw under rubber in arm rest, pops right off. Back doors same deal to get the panel off. However the sweep is attached to a privacy screen, you need to remove the screen. Its attached to the quarter window screen also. Pop the front cover off the quarter window screen its three red clips. There are two silver screws behind that you need to remove. Once the panel is pulled there are four more silver screws along the bottom of the screen that need to be removed, then the whole thing comes off as one unit. After that its just another Acura. BG is flat, has a moulded third brake light, buy easy to get your dozzer or whatever you use behind it. Did this one in 20%.
 

FYI the brake light pops up and out  

T 25 under arm rest, remove trim around door pull. Two more T 25's under that. Pop panel working from bottom up, then lift the panel up and off the door. Bombs Away!

Just did this one in Pin 35/15. Two 7mm under silver trim. One T20 torx under window switch. Pull back and seal comes out!

Just did this one in Pin 35/15. Two 7mm under silver trim. One T20 torx under window switch. Pull back and seal comes out!

Huge thanks to @GlassWithClass and @FondyTints for the instructions.
 
Did one of these this past weekend.
 
I'm new to the game so I tried three times and finally said to myself "I can't be the only one having this much trouble!" and came here for advice.
 
Once the tray was out, tinted it fine on the first try. Whew!
 
Learned a valuable lesson too, search the forum sooner.

Pop trunk, unplug brake light. Drop rear seats. 4 plastic push clips with rubber ends pull then unscrew. Then there is a plastic access cover on each side of plastic seat pillar pull that out with a pick. 1 torx screw Behind each, its deep in there so use a magnetic screw driver. Pull the top of the pillar out and you will see one more push clip behind them, remove. Then pull the side trim along the glass ( just yank them out towards the middle of the car). Now make sure you take the seat belt straps out of the deck, then flip child seat covers up, you will see that the deck has three tongues that stick out a bit. Just take note when maneuvering. Now lift up on the deck by the end closest to you, there are only two metal clip on each side underneath that will pop. Then just slide it out. FYI front door panel peals back and seal comes out, rear door requires 1 torx behind plastic trim near the quarter window. Then that will peal back and seal can be removed with hook tool. Hope this helps for future reference. 

Pop trunk, unplug brake light. Drop rear seats. 4 plastic push clips with rubber ends pull then unscrew. Then there is a plastic access cover on each side of plastic seat pillar pull that out with a pick. 1 torx screw Behind each, its deep in there so use a magnetic screw driver. Pull the top of the pillar out and you will see one more push clip behind them, remove. Then pull the side trim along the glass ( just yank them out towards the middle of the car). Now make sure you take the seat belt straps out of the deck, then flip child seat covers up, you will see that the deck has three tongues that stick out a bit. Just take note when maneuvering. Now lift up on the deck by the end closest to you, there are only two metal clip on each side underneath that will pop. Then just slide it out. FYI front door panel peals back and seal comes out, rear door requires 1 torx behind plastic trim near the quarter window. Then that will peal back and seal can be removed with hook tool. Hope this helps for future reference. 

Great posts here. All have good time saving techniques. My experience with this rear window Using Huper Optic Ceramic was the time it took to shrink

 

 

 

Quarter glass on these are fun  
2015 S65 AMG Pin 30/15%

A old and new hotrod car

Aston rapide pinnacle 30