JoshVette
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Subscriptions
Posts posted by JoshVette
-
-
No link, but I got mine from GTechniq website. They're pretty darn good MF towels.
-
On 12/2/2020 at 6:52 PM, Prairie_Install0 said:
For me I get $21 per hour x flatrate job. So $21x6hrs for a full package. That includes a Fullhood,Fenders,Mirrors,Doorcups,Rear bumper deck, and mostly full bumper coverage (if the pattern is there for bumper accessories I install it). This is also with Wrap tabs for hood and fenders.
Are you saying you make $126 ($21x6hrs) for a full front job?? the film alone is triple that cost.
Am I missing something? that sounds off??
-
Most of that is fixable. The bubbles can be popped as mentioned and many of those edges can be trimmed so they're not frayed.
Honestly a jeep is a really tough install and with all those curves there's not much to tack too so the stretch marks are going to be there. Some vehicles are just not great for film.
I would at least give him a chance to fix it.
-
BTW a lot of the software out there will allow you to make circles and such other objects at the size you want and cut it out.
-
On 10/2/2020 at 7:26 PM, Capital PPF_Norm said:
It might be worth while then to allow 5 downloads for every upload of a new pattern or something like that to keep everyone involved. As far as B pillars, I have found the Suntek patterns to NOT have those so far...
For which car do they not have the B pillars? they have the software for most every SUV B pillars and many cars Ive done, mainly 4 door sedans. Not every car will be in there of course but I've found quite a few of them. The lower end cars they prob won't have.
Honestly it only takes a few minutes to do a B pillar, cut one side straight on the table, then cut the other side out on the car. The amount of time it takes to lay out the film, pull up the patterns, arrange them, cut them, weed them and install them you could just throw them on and cut them out.
-
I agree with Norm, there's no guarentee you won't have to use a knife on the car with a pre cut kit. I wouldn't try a new film to be honest, just cause it looks good for a month doesn't mean it will stay that way for the next 3-5 years. Use a brand that is tried and true.
-
Honestly most software out there already includes B pillars and the other pillars, at least on SUV's they will and many cars too.
Not a bad idea though but most people won't see the value in doing all that homework just to give it away for free. You'll end up having one or two dedicated passionate installers out there helping everyone else out and no one helping them out.
Josh
-
16 hours ago, Capital PPF_Norm said:
C'mon Josh, take a CHANCE with the $1100 new iphone! Isn't it waterproof?
Do yours first and I'll do mine.... lol
-
I was just about to mention your squeegee techniques but looks like you figured it out.
Also keep in mind to squeegee with the contours of the car and try to leave yourself an out for all the solution to go to. If you close off all the perimeter of a panel before you squeegee you'll not be able to push it all out so try to foresee the process before you start it. There will be high points on certain panels that will start to dry faster and you need to anticipate those types of things, if they start to dry before you squeegee over them you can cause issues and marks in the film.
On more difficult panels, mainly bumpers, I actually visualize and walk through it before I do it and it helps greatly to identify high points and large pockets before you actually install the film. (keep in mind I bulk bumpers no kits)
Just some things to think about.
Josh
-
You really going to spray or mist a smart phone/tablet, put ppf on it then squeegee it out?? I wouldn't.
-
IMO Xpel is very close to suntek in clarity but Suntek is still a bit better. You really have to see them side by side to see the difference though.
-
Like Norm said, it just needs to be trimmed out a little further. Film will only stretch so much.... trim it.
-
No sickness, and no makes or gloves or anything the whole time either.....
-
I have not noticed any issues with their film sticking.
I do every now and then get a client that just couldn't wait and already waxed or ceramic coated their car and I've had one or two new vehicles that felt like the film didn't want to stick as well, but then the next car I have no issues.....
-
I have a 60 inch plotter but have never used it past 30 inches. However I bulk everything including bumpers so I'm not a good person to answer that question. I just know most installers use pre cut kits for bumpers.
Some cars like the Porsche 911 have a very large rear fender which connects to the A Pillars and lower Rockers so that will need to be done on a 60, possibly a 48 but better to have extra.
I believe Suntek TruCut is $100 per month, no fee per cut, cut as many patterns as you like.
Not sure if it works on a Mac either, I have a laptop for it.
You should get in touch with someone at Suntek as I'm sure they could better answer your questions.
Josh
-
My opinion is don't go exclusive, you don't want anyone tying your hands, be free to use whoever you want and change it whenever you want.
With all the turnover, I'd bet you could find a good, used plotter much cheaper then a new one.
I think Suntek's TruCut is the better software out there, from the standpoint of, it being accurate enough, cheap enough per month and simple. You just pay a monthly fee and don't mess with all the "money making" schemes some of the others are trying to push by making you pay monthly, then for each pattern and also be exclusive with their films..... ugh
I wouldn't put too much money into software, most cars can easily bulk hoods, fenders, doors and such. You really only need it for bumpers and large rear fenders that connect to the A pillars like sports cars do. But's its nice to have for B-pillars and such small areas like that. I mainly use it for headlights and Porsche doors since the mirror base is on the door.
If you learn to do more bulk installs you'll save tons of money on the software and patterns from XPEL and you'll turn out cleaner looking installs with better lines and less marks in the film.
I also think Suntek and STEK have the best films right now, Suntek is tried and true, very user friendly and a great Co. to be connected with. They take care of their installers.
STEK has a new film, it's extremely user friendly and very hydrophobic and they have a whole line of Fashion Films that are awesome but they're the new kid on the block so....
Josh
-
Most of that looks like the underside of edges he tucked but possibly didn't heat down. Simple trim up should fix most of that. I wouldn't say it was a poor install for the underside of edges not being perfect. If that was on the top side then maybe yes.
-
My suntek rep told me today the Core patterns are just more accurate patterns and eventually they will be switching all there patterns over to this new system.
-
On 5/20/2020 at 6:11 AM, Capital PPF_Norm said:
Yea, you should have told me about needing my name change on TintDude 5 years ago!
Anyways, I don't have the job booked, because I am still waiting for the building owner to put in the walls for my office & there is going to be a dividing wall between my wash bay and my film install bay that isn't up yet. But otherwise, I have 2 or 3 that are waiting in the wings for me. (Also, getting big pieces of glass delivered soon to be my work-table top and my roll-around for the shop next week)
Not too far away now though!
Good to hear things are up and going or getting going for you.
I didn't even know about tintdude back then, plus I had no way to reach you, it's all good though, been staying busy so no worries.
I don't get on this site too much but check it every now and then.
Good luck with it all.
Josh
-
tell him to try to peel it off and that should settle it.
Josh
-
Large glass panels hanging on a wall or something like that.
Spray water on the glass, hang the film on the glass, remove the backing, wet it, wet the car, peel the film off the glass and lay it on the car.....
Josh
-
thank God....
-
On 5/6/2020 at 4:39 PM, Capital PPF_Norm said:
Haha, well, a 5 year 'retirement' anyways. I'm building it back up again in North Carolina! Any new stuff going on? (I'm gonna have to change my screen name since I sold Invisibra)
I took over Invisibra but I couldn't sign in on this forum cause Norm still had the name and I couldn't log in under it, so now that he's changed his name to Capital maybe I'll be able to get Invisibra back up..... yeah!!! lol
Hope everything is going well for you Norm, have you booked your first install for NC yet?
Josh
-
$3000 sounds a bit steep for a full front but what car are we talking about? A tesla or a Viper?
Lint free cloths
in Paint Protection Film, Clear Bra Forum
Posted
Shoot, I thought he was asking about MF towels?? lol
Yes for Shirts even if you get lint free, there's still pet dander and all kinds of things that can stick to it so I typically have several lint rollers at the shop that I use several times a day.
It helps.
Josh