Jump to content

a good tool

Guest JDMDC2

By Guest JDMDC2
in Paintless Dent Repair & Vehicle Wraps

Recommended Posts

RICHat22

RICHat22

Posted
Posted

I'm not a PDR man but have several good friends that are so I get to rumage through their toys. I would get you a couple rods like they use and drill a unibit hole in the side and start practicing. I don't know how much they charge for a couple dings as I've always gotten my cars done free. They keep me paid well, I do what I can for them too. Try finding someone local and offer to come to them when they are on a nearby dealer lot. talk some :) about referrals and business and see if you can't get it cheap or free on a slow day. :)

I like to trade work out myself. Go retail for retail to keep it level

There is no magic tool for the amateur. Well there is one for TG :)

Link to comment
Share on other sites
Guest tintgod

Guest tintgod

Posted
Posted
I'm not a PDR man but have several good friends that are so I get to rumage through their toys. I would get you a couple rods like they use and drill a unibit hole in the side and start practicing. I don't know how much they charge for a couple dings as I've always gotten my cars done free. They keep me paid well, I do what I can for them too. Try finding someone local and offer to come to them when they are on a nearby dealer lot. talk some :lol about referrals and business and see if you can't get it cheap or free on a slow day. :hmmm

I like to trade work out myself. Go retail for retail to keep it level

There is no magic tool for the amateur. Well there is one for TG :wall

I'm not a PDR man

yeah..your not..so dont give advice

I would get you a couple rods

yeah..I bet you do... :hmmm

There is no magic tool for the amateur.

yeah...you are :lol:wall

Link to comment
Share on other sites
Guest kccartint

Guest kccartint

Posted
Posted
:lol If you don't know pdr than stay away from it. You will only make it alot worst than it is. And when you get it fixed it makes it much harder to get a good repair.
Link to comment
Share on other sites
Guest Sprinter

Guest Sprinter

Posted
Posted

when I was doing it the cost was 75 per panel and 20 per extra dent in the same panel. and the bigger the dent the more it was also if it was in a hard place the price would go up to.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    tinttek

    filmvinyldesigns

    ride wrap

    Conco

    Lexen

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

  • Activity Stream

    1. 6

      Automotive Tint Comparison

      It's probably worthwhile mentioning that I live in a climate similar to Dallas-Fort Worth Texas region (in particular around Denton/Sherman); Lawton, Oklahoma or Puebla de Zaragoza in Mexico
      MVOZ in Window Tinting - General Discussion
    2. 6

      Automotive Tint Comparison

      I forgot to ask about Low Angle Haze (LAH), do any particular films have less LAH than others? Is LAH so much of a problem that it's better to avoid ceramic tint and go another kind of tint like SunTek CXP (CarbonXP) CXP
      MVOZ in Window Tinting - General Discussion
    3. 0

      At What VLT% does visibility start being impacted

      In the jurisdiction in which I live, we are allowed to have 35% in front and 20% in rear. I'm wondering @ what VLT% does the driver's visibility in adverse conditions like night time driving, storms, cloudy weather, fog, floods, etc., start being impacted? Front side windows: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% Rear Side Windows: 38.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00% Rear Window: 45.00% 43.00% 42.00% 41.00% 40.00% 39.00% 38.00% 37.00% 36.00% 35.00% 33.00% 32.00% 31.00% 30.00% 29.00% 27.00% 25.00% 23.00% 22.00% 21.00% 20.00%
      MVOZ in Window Tinting - General Discussion
    4. 6

      Automotive Tint Comparison

      If the only tinter providing MEP Films is a mobile tinter that uses more water than normal and I don't have a garage to tint in then would you avoid the tinter and opt for a tinter with a workshop that uses either: SunTek CIR (CeramicIR) CIR SunTek CXP (CarbonXP) CXP SunTek Evolve Solargard VTX Pro Premium Ceramic (by the way, does anyone know where the Technical Spec sheet is, I tried finding to no avail) XPEL Prime XR Black Johnson Window Films InsulatIR IR GLOBAL WINDOW FILMS QDP CERAMIC FILMS Global OZ Window Films CBXtreme Ceramic
      MVOZ in Window Tinting - General Discussion
    5. 4

      Why is my film sliding around in GCC Jag V Plotter?

      Your film might be sliding around in your GCC Jaguar V plotter due to several reasons. Firstly, ensure that the film is loaded correctly and securely in the plotter's rollers. Check for any debris or dirt on the rollers that could cause slippage. Additionally, ensure that the plotter's settings, such as speed and pressure, are appropriate for the type of film you're using. Using a tackier or adhesive-backed film can also help prevent sliding. Lastly, make sure the plotter's firmware and software are up to date to avoid any compatibility issues that could lead to film slipping during plotting.
      amirahussein in Paint Protection Film, Clear Bra Forum
    6. 5

      Cracked glass

      I was thinking it would be higher on the absorption.... Great info on the whole post though Tintguy
      Ryker in Window Tinting - General Discussion
    7. 6

      Automotive Tint Comparison

      MEP Films distribute Llumar in Australia. I for one have been using Llumar since 1984 and have very rarely had or seen any issues with quality and that is why the brand is my go-to the majority of the time. Sun Tek have some good automotive films that I like, but other than those, I am strictly a Llumar user. BTW Eastman Chemical own both Llumar and SunTek so I imagine their film technology may be somewhat shared.
      doctor4766 in Window Tinting - General Discussion
    8. 0

      Better shop in Europe to buy Films and Tools?

      Hi guys, Im new here and learning how to tint… I live in Europe and to find tools and tints to buy here is very difficult. I just got some tools and tint on this website: tintwrap.eu This website was the only one I could find some felt squeegee and high quality films with the best price to deliver in Europe without ripping me off. the delivery was quick, about 2 days. and the material was high quality as well. Do you guys have any other websites suggestions? Thanks
      Hendrix in Window Tinting - General Discussion
    9. 0

      Paint Protection Film (PPF) is it needed or worth it?

      I've never had PPF done before and never had issues with the paint on the car looking bad. I usually park in the garage and have had Kia Casa White - Solid on my Sportage since 2015 and no noticeable issues with the paintwork. The new car is Glacier White - Solid I've been told that PPF is beneficial, but very few people I know have actually opted to get it for their cars. I've been told there are many benefits such as: No need to ever wax or use sealant after the coat is applied Stops the paint fading Makes cars super easy to wash Prevents Acid Etching from animal contaminants, hard water spots, tree sap UV Rays Acid Rain (although I don't think I've ever seen acid rain) Repels Water & Grime Saves Water Will not wash off, crack or peel Non-abrasive Self-Healing Properties: repair minor surface scratches and swirl marks on their own when exposed to heat. So is this all simply marketing spin to provide another product to the market without any noticeable benefits? Does the average family car really need PPF or is this more the reserve of the show car, tuner set, car aficionado niche? Brands SystemX Australia Johnson Paint Protection 3M Cleargard Paint Protection Pro Series Film OMNI Nano-Ceramic Surface Coating 3M Scotchgard Paint Protection Film Pro Series Ceramic Coating Package Graphene Coating Package SunTek PPF OZ Paint Protection Film OZ Paint Protection Films GTechniq Ceramic Coatings Tint Haus 10H Ceramic Coating XPEL Ultimate Fusion Swissvax handmade wax range. Opticoat Pro Ceramic Pro 9H CQuartz Finest Pompanazzi Gtechniq Crystal Serum
      MVOZ in Paint Protection Film, Clear Bra Forum
    10. 5

      Cracked glass

      Follow up: Attached is the performance data for Johnson's Resi/Comm window films and if you look to the bottom you'll see DN50 has a solar absorption of 39%, which is well below the threshold of concern which is generally accepted as 50% absorption (with no shadow). With a straight line shading from the roof this does increase the risk, which is usually low for straight line shading compared to other types. I've also attached a pdf of Johnson's film-to-glass chart which is used to determine how safe a film is. The thicker the glass the higher the risk; you say 6mm tempered and 4mm is the cracked one (interior pane). The question now is what compass direction do these panels face? In the end, I'll just suggest you hook back up with the person that installed it and get his input. He had to have been comfortable suggesting that film. I still believe it's a one off cracked panel and the rest will be fine. It takes 2 seasonal cycles to know for sure. Truly your call as to whether or not to replace with something lighter such as DN60. Here's more helpful info that helps you question the glass type on the interior; is it plate or is it heat-strengthened (HS). I believe it is plate and not tempered or HS. Why? Plate glass with suffer thermal shock if the edge temperature is different than the center of the glass by 50 degrees F. Heat strengthened requires 100 degree F difference, and Tempered requires 200 degree F difference. Ryker chimed in and that stimulated further review. Good Luck with this. johnsonFilmToGlass_2021.pdf
      Tintguy1980 in Window Tinting - General Discussion
×
×
  • Create New...