Jump to content

2005 3 series

Guest expertint

By Guest expertint
in BMW

Recommended Posts

Guest BLACKOUT SoKal

Guest BLACKOUT SoKal

Posted
Posted

nice headrest trick :nono I usually end up trying to tint around pesky bmw rests that dont want to buduge because I dont want to hurt the bmw....next time I'll take a hammer to it :nono

Link to comment
Share on other sites
Guest Oscar Tint

Guest Oscar Tint

Posted
Posted
nice headrest trick :lol I usually end up trying to tint around pesky bmw rests that dont want to buduge because I dont want to hurt the bmw....next time I'll take a hammer to it :lol

good call :evileye

Link to comment
Share on other sites
Guest caraudio1

Guest caraudio1

Posted
Posted

I posted this on another similar thread about the rear headrest. I would suggest with headrest on any car not to use force. I've been in car audio for 20 years working on expensive cars primarily and using force usually causes damage. Most headrest are held in by locking clips or some do snap in. On most BMW's there are little metal clips that lock into notches on the headrest posts. There is one on each post that must be removed to slide the headrest out. If you lift up the front part of the rear deck you can access these clips easily. Depending on the model of BMW this can be easy or take some time. If you are someone who takes pride in your work than it is worth taking the time to remove these clips so that the headrest can be reinstalled like factory once you are finished.

My tint guy and I are always comparing notes on taking cars apart. If you know any good car audio installers they usually know how to take car interiors apart and have learned how not to break things. But good ones are hard to find.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
  •   Sponsored by
    ride wrap

    Lexen

    Tint My Ride

    tintwiz

    auto-precut.com

    signwarehouse

    martinmetalwork.com

    tinttek

    filmvinyldesigns

    The Tint Tutor

  • Activity Stream

    1. 5

      TintX Puremax and Koolmax

      All Right cool. I've been practicing with an inexpensive tint I found on amazon. Its called Rockrose. I'm just about ready to make some cards to pass around to get clientele. I've been debating if I should start with Puremax cuz its a lot cheaper or Geoshield cuz of the great quality I've heard of. I'll probably go with Geoshield so I can make it easy on myself and make sure I do great quality work for my customers. Are you already doing doing jobs for customers? If so, did you stop using the Puremax and now only use Geoshield?
      Headbanger in Window Tinting - General Discussion
    2. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Ghosting week require a smoother, more even and spread out shrink. Look at my old "ryk shrink" using 2 heart guns with an over/under setup. That would be my suggestion.
      Ryker in Window Tinting - General Discussion
    3. 1

      Heavy Ghosting - Geoshield "Geo" Line

      Hey all, I am not a pro tinter but more or less just someone who likes to experiment / DIY. Wanted to ask if there was anyone here who has used the Geoshield "Geo" line for automotive purposes? I really like the color, but I get really bad ghosting for anything that requires decent shrinking. The film is specced as architectural, but has a PS adhesive so some use it in auto applications. I sent an email to see if that is the reason why it's for flat glass .. lol This is a sputtered TiN film and has a beautiful color imho. This reminds me of Huper Optik, and not quite sure but I think Johnson had a line called "InsulatIR" that I could never get my hands on to try. The film has a slightly purplish reflection (TiN I guess), when put on green auto glass, filters out and looks super neutral. ❤️ I've had it on my auto for a while but my rear window is a mess when the sun hits it (ghosting) and was curious if this is just not suitable for auto Any info would be appreciated. Skill issue, ie: shrink with lower heat? lol Thanks.
      caterpill in Window Tinting - General Discussion
    4. 3

      chameleon window tint good quality

      If you don't mind trying to source some, there is a large Japanese manufacturer that makes a bunch of dichroic - looking films. It might be your style, but it would be hard to get your hands on some. https://www.braintec.co.jp/filmlab/ I believe some of the films do have decent heat-rejection, but because of the nature of the films, looking through them can be really funky. They are well-known in Japan and would likely be of decent quality. Also, very expensive. Depending on where you are, shipping would also be $$$.
      caterpill in Window Tinting - General Discussion
    5. 5

      TintX Puremax and Koolmax

      I feel the difference in quality with geoshield. Not only is it easier to peel the liner off but shrinking feels better and I think the material feels slightly thicker(helps with not creasing) Only downside that the price noticeably different. For mainly everything Its atleast another 100 on top of for example stuff from tints Lexen. I haven’t tried solarfree either.
      Offwhitetintz in Window Tinting - General Discussion
    6. 38

      Does anybody tint part time?

      I have a Part Time window tinting company. 2 jobs a day, $225 per car. $$$ Part Time Tinting, Automotive, Marine, Commercial, and Residential. Sebastians Go to Tinting Service
      Eli Part Time in Window Tinting - General Discussion
    7. 5

      TintX Puremax and Koolmax

      BTW have you ever worked with a film called Solarfree?
      Headbanger in Window Tinting - General Discussion
    8. 5

      TintX Puremax and Koolmax

      Cool. Hows it like shrinking with Geoshield?
      Headbanger in Window Tinting - General Discussion
    9. 10

      Automotive Tint Comparison

      At least twice, yes. Although since we don't know what vehicle it is you're planning to tint, that was a bit presumptuous of me.
      doctor4766 in Window Tinting - General Discussion
    10. 1

      The History of Window Tinting

      Interesting post, the first piece of window film installed " TRANSPARENT AND REFLECTING ARTICLE" from 3M was installed in the summer of 1959 . at that time the company that installed the film was Columbia Building Maintenance and at that time the film did not have an adhesive.
      MikeMN in Window Tinting - General Discussion
×
×
  • Create New...